Chapter 9 Network

Telnet access lets you use line commands to configure the NSA. Use these commands at your own risk. The vendor takes no responsibility for any changes you make using the commands.

Click Network > Telnet in the navigation panel to open the following screen.

Figure 70 Network > Telnet

The following table describes the labels in this screen.

Table 34 Network > Telnet

LABEL

DESCRIPTION

Enable Telnet

Select this to enable Telnet access to the NSA. Clear it to not allow Telnet access to the

Service

NSA.

 

To use Telnet, log in as “admin” or “root” and use the admin password.

 

 

Apply

Click this to save your changes.

 

 

Reset

Click this to restore previously saved settings.

 

 

184

 

Media Server User’s Guide