Chapter 2 Introducing the Web Configurator

factory-default configuration file. This means that you will lose all the settings you previously configured. The password will be reset to “1234”.

Figure 8 The RESET Button

2.2.1 Methods of Restoring Factory-Defaults

You can erase the current configuration and restore factory defaults in two ways:

Use the RESET button to upload the default configuration file. Hold this button in for about 3 seconds (the light will begin to blink). Use this method for cases when the password or IP address of the NWA1121-NI is not known.

Use the web configurator to restore defaults (refer to Section 11.8 on page 124).

 

21

NWA1121-NI User’s Guide