ZyXEL Communications NWA1121NI 77

		Chapter 6 Wireless LAN

	Table 16 Security: WEP (continued)
	LABEL	DESCRIPTION
	Key 1 to	The WEP keys are used to encrypt data. Both the NWA1121-NI and the wireless stations
	Key 4	must use the same WEP key for data transmission.
	Key 4
		If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
		characters ("0-9", "A-F").
		If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal characters
		("0-9", "A-F").
		You can configure up to four keys, but only one key can be activated at any one time.

	Back	Click Back to return to the previous screen.

	Apply	Click Apply to save your changes.

	Cancel	Click Cancel to begin configuring this screen afresh.

6.6.2 Security: 802.1x Only

This screen varies depending on the operating mode you select in the Wireless LAN > Wireless Settings screen.

6.6.2.1 Access Point

Use this screen to use 802.1x-Only security mode for your NWA1121-NI that is in root AP, MBSSID or repeater operating mode. Select 802.1x-Onlyin the Security Mode field to display the following screen.

Figure 29 Security: 802.1x Only for Access Point

The following table describes the labels in this screen.

Table 17 Security: 802.1x Only for Access Point

LABEL	DESCRIPTION
Security Settings

Profile Name	This is the name that identifying this profile.

Security Mode	Choose 802.1x-Onlyin this field.

Rekey Options

	77
NWA1121-NI User’s Guide	77