Chapter 9 System

The following table describes the labels in this screen.

Table 32 System > Telnet

LABEL

DESCRIPTION

TELNET

 

 

 

Port

You can change the server port number for a service if needed, however you must use

 

the same port number in order to use that service for remote management.

 

 

Server Access

Select the interface(s) through which a computer may access the NWA1121-NI using

 

Telnet and to which the IP and MAC filtering rules you specified below are applied.

 

Otherwise, select Disable to allow any computer to access the NWA1121-NI through any

 

interface using Telnet.

 

 

Secured Client IP

A secured client is a “trusted” computer that is allowed to communicate with the

Address

NWA1121-NI using this service.

 

Select All to allow any computer to access the NWA1121-NI using this service.

 

Choose Selected to just allow the computer with the IP address that you specify to

 

access the NWA1121-NI using this service.

 

 

Secured Client

Select All to allow any computer to access the NWA1121-NI using this service.

MAC Address

Choose Selected to just allow the computer with the MAC address that you specify to

 

 

access the NWA1121-NI using this service.

 

 

Apply

Click Apply to save your customized settings.

 

 

Cancel

Click Cancel to begin configuring this screen afresh.

 

 

9.7 SNMP Screen

Use this screen to have a manager station administrate your NWA1121-NI over the network and configure SNMP accounts on the SNMP v3 manager. An SNMP administrator/user is an SNMP

 

107

NWA1121-NI User’s Guide