Chapter 9 System
Table 33 System > SNMP (continued)
LABEL | DESCRIPTION |
SNMPv3 User |
|
Settings |
|
|
|
SNMPv3 User | Select the check box to enable the SNMP user account for authentication with SNMP |
| managers using SNMP v3. |
|
|
User Name | Specify the user name of the SNMP user account. |
|
|
Password | Enter the password for SNMP user authentication. |
|
|
Confirm Password | Retype the password for confirmation. |
|
|
Access Type | Specify the SNMP user’s access rights to MIBs. |
| Read Only - The SNMP user has read rights only, meaning the user can collect |
| information from the |
| Read/Write - The SNMP user has read and write rights, meaning that the user can |
| create and edit the MIBs on the |
|
|
Authentication | Select an authentication algorithm used for SNMP communication with the SNMP user. |
Protocol | MD5 (Message Digest 5) and SHA (Secure Hash Algorithm) are hash algorithms used |
| |
| to authenticate SNMP data. SHA authentication is generally considered stronger than |
| MD5, but is slower. |
|
|
Privacy Protocol | Specify the encryption method used for SNMP communication with the SNMP user. |
| DES - Data Encryption Standard is a widely used (but breakable) method of data |
| encryption. It applies a |
| AES - Advanced Encryption Standard is another method for data encryption that also |
| uses a secret key. AES applies a |
|
|
Apply | Click Apply to save your customized settings. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
9.8 FTP Screen
Use this screen to upload and download the
To change your
Figure 53 System > FTP
110 |
|
|
|