Chapter 4 Network Setting

4.3 LINK

Use this screen to change your IP settings. The NWA1300-NJ’s Ethernet port is set to DHCP client mode by default. Click NETWORK SETTING > LINK.

Figure 6 NETWORK SETTING > LINK

The following table describes the labels in this screen.

Table 4 NETWORK SETTING > LINK

LABEL

DESCRIPTION

DHCP Client

Select this option if your NWA1300-NJ is using a dynamically assigned

 

IP address from a DHCP server each time.

 

Note: You must know the IP address assigned to the NWA1300-

 

NJ (by the DHCP server) to access the NWA1300-NJ again.

 

 

MTU Setting

Enter the MTU (Maximum Transmission Unit) size for the Ethernet

 

interface.

 

 

Static IP

Select this option if you were assigned a fixed IP address (and DNS

 

server settings) to use for Internet access

 

 

IP Address

Enter the IP address of your NWA1300-NJ in dotted decimal notation.

Note: If you change the NWA1300-NJ's IP address, you must use the new IP address if you want to access the web configurator again.

Subnet Mask Enter the subnet mask that specifies the network number portion of an IP address.

 

33

NWA1300-NJ User’s Guide