Chapter 6 Administration

2Run a TFTP server program and specify the location of the firmware file and the communication mode. Refer to the documentation that comes with your TFTP server program for instructions.

3Access the web configurator. Refer to the section on accessing the web configurator for instructions.

4Click ADMINISTRATION > FIRMWARE.

Figure 14 ADMINISTRATION > FIRMWARE > Manual Firmware Upgrade: via TFTP Server

5Specify the IP address of the TFTP server in the Remote TFTP Server IP Address field.

6Specify the name of the firmware file in the File Name field.

7Click Apply to start the file transfer process.

8When the file transfer is completed successfully, the NWA1300-NJ automatically restarts.

WARNING!

Do not interrupt the file upload process as this may

PERMANENTLY damage the device.

9After the NWA1300-NJ finishes restarting, access the web configurator again. Check the firmware version number in the SYSTEM STATUS screen.

6.4.3Scheduled Firmware Upgrade

Click ADMINISTRATION > FIRMWARE > Scheduled Firmware Upgrade.

Configure the screen to automatically download the latest firmware from a TFTP server.

 

51

NWA1300-NJ User’s Guide