Chapter 6 Administration

To change your NWA1300-NJ’s FTP settings, click ADMINISTRATION > FTP. The screen appears as shown. Use this screen to specify from which IP address the access can come.

Figure 12 ADMINISTRATION > FTP

The following table describes the labels in this screen.

Table 10 ADMINISTRATION > FTP

LABEL

DESCRIPTION

Server Port

You may change the server port number for a service if needed,

 

however you must use the same port number in order to use FTP to

 

access the NWA1300-NJ.

 

 

Secured Client

A secured client is a “trusted” computer that is allowed to communicate

IP Address

with the NWA1300-NJ using this service.

 

Select All to allow any computer to access the NWA1300-NJ using FTP.

 

Choose Selected to just allow the computer with the IP address that

 

you specify to access the NWA1300-NJ using FTP.

 

 

Reset

Click Reset to reload the default configuration for this screen.

 

 

Apply

Click Apply to save your changes back to the NWA1300-NJ.

 

 

6.4 FIRMWARE

There are two ways to upgrade firmware to the NWA1300-NJ: manually or scheduled.

To manually upgrade the firmware, you have to download the latest firmware first from www.zyxel.com and then upload it to the NWA1300-NJ. You can upload it to the NWA1300-NJ using the Web Configurator or using a TFTP server.

With scheduled firmware upgrade, you need to set up a TFTP server where the NWA1300-NJ can automatically download the latest firmware at the specified time.

 

49

NWA1300-NJ User’s Guide