Chapter 6 Administration

1Click ADMINISTRATION > CONFIGURATION. A screen displays as shown next.

Figure 23 ADMINISTRATION > CONFIGURATION: Restore Using TFTP

2Enter the IP address of the TFTP server in dotted decimal notation in the Remote TFTP Server IP Address field.

3Specify the file name of the configuration file in the File Name field.

4Click Apply to start the configuration restore process. The NWA1300-NJ automatically restarts after the restoration process is complete.

6.5.5Back to Factory Defaults

Pressing the Apply button in this section clears all user-entered configuration information and returns the NWA1300-NJ to its factory defaults.

You can also press the reset button on the front panel to reset the factory defaults of your NWA1300-NJ. Refer to the chapter about introducing the Web Configurator for more information on the reset button.

6.6 SNMP

Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. Your NWA1300-NJ supports

58

 

NWA1300-NJ User’s Guide