omni.net Plus/D Quick Start Guide

1-2

Front Panel LEDs
LED Function Active Description
PWR
Power LED On When the power is turned ON.
LNK
Link LED On
Blinking
When the link with the local ISDN switch is active.
When attempting to make a connection.
B1
B1 Channel On When the B1 channel is established.
B2
B2 Channel On When the B2 channel is established.
AA
Auto-Answer On
Blinking
When your ISDN TA is in Auto Answer mode.
When your TA rings.
CP
Compression On
When Data Compression is being used over one or more
of the B Channels. Compression types are Hi/fn LZS
(formerly Stac) for PPP connections, and V.42bis for
V.120 or X.75 connections.
DTR
Data Terminal
Ready On When the DTE or computer connected to the DTE
port signals that it is ready for communication by
establishing the RS-232 link.
DSR
Data Set
Ready On
When the modem is ready for communication with the
DTE.
RTS Request To Send
On
When the DTE has data to be sent to the remote modem.
The RTS signal is used in Hardware Handshaking.
CTS Clear To Send
On
When the modem is ready to receive data from the
remote modem. The CTS signal is used in Hardware
Handshaking.
TX
Transmit Data Blinking When the DTE/Computer transmits data to the
DTE port.
RX
Receive Data On When the DTE/Computer receives data from the
DTE port.
Phone 1
(for omni.net
Plus only)
On
When the POTS port 1 telephone/handset is off-hook.
Phone 2
(for omni.net
Plus only)
On
When the POTS port 2 telephone/handset is off-hook.