P-971M User’s Guide

Figure 15 CLI: Save Command Example

CM> save

Instance: BFC System (0x80ffba50)

Section 1 Non-Vol Settings successfully written to the device.

Section 2 Non-Vol Settings successfully written to the device.

CM>

Note: You must save your changes after each CLI session. All unsaved configuration changes are lost once you restart the Prestige.

5.5 Logging Out

To log out of the CLI and stop the Telnet session, enter the logout command.

Figure 16 CLI: Logout Command Example

CM> logout

Bye bye...

Connection to host lost.

5.6 Command Summary

The following sections summarize the commands available in the Prestige together with a brief description of each command. Commands listed in the tables are in the same order as they are displayed in the CLI. See the related section in the User’s Guide for more background information.

5.6.1 General Commands

The following table describes the general commands you enter to display the command help information or set general system settings.

Table 4 General Command Summary

COMMAND

DESCRIPTION

 

 

 

!

 

Executes the most recent command you entered.

 

[Number{0..15}]

Executes the specified command in the history command

 

 

list.

Chapter 5 Introduction to CLI

48