P-971M User’s Guide

Table 5 CM Command Summary (continued)

COMMAND

 

DESCRIPTION

 

 

 

web_admin_passwo

<WebAdminPass{15}>

Sets the web configurator administrator login password.

rd

 

Note: You must save the changes and restart

 

 

 

 

the device to make the changes take

 

 

effect.

 

 

 

web_user

<ID{20}>

Sets the web configurator user login password and

 

<password{20}>

username.

5.6.3 docsis_clt Commands

Use the docsis_clt group of commands to maintain image (firmware) files, display downstream/upstream status or set the downstream channel.

To access the docsis_clt commands, enter cd docsis_clt or cd d. The command prompt changes to docsis_clt>.

Table 6 docsis_clt Command Summary

COMMAND

DESCRIPTION

 

 

copy_image

<Name{15}><Name{15}>

Copies image file 1 to image file 2.

dload

<option {-fils}>

Downloads the image file from a TFTP server. After the

 

<Name{15}>

image download process is complete, the device

 

<IpAddress>

automatically restarts.

 

If you don’t specify an image filename and/or TFTP server

 

 

 

 

IP address, the device reloads the image file from

 

 

memory.

 

 

-ispecifies index number of the image file to overwrite.

 

 

-fforces the device to save the image file even if the

 

 

signature and/or compression is incompatible.

 

 

-loverwrites the first image file with the downloaded

 

 

image file.

 

 

-sdownloads a secured image file and overwrites to the

 

 

current image file.

dsdiag

 

Displays downstream status.

goto_ds

<frequency>

Sets the downstream channel (in Hz or MHz). If the device

 

 

cannot use the specified rate, it automatically scans for

 

 

the best channel to use.

scan_stop

 

Stops the automatic downstream channel scan. To start

 

 

channel scanning again, enter the goto_ds command.

usdiag

 

Displays upstream status.

51

Chapter 5 Introduction to CLI