P-971M User’s Guide

6.3.3 goto_ds

Syntax:

goto_ds Frequency

This command sets the downstream channel (in MHz). If the device cannot use the specified rate, it automatically scans for the best channel to use.

The following example sets the downstream channel to 400Mhz.

Figure 28 goto_ds Command Example

CM/DocsisCtl> goto_ds 400

6.3.4 scan_stop

Syntax:

scan_stop

This command stops the Prestige from downstream channel scanning. The following figure shows an example.

Figure 29 scan_stop Command Example

Scanning plan at 2 -- HRC

-- 400000000 Hz...

Scanning plan at 2 -- HRC

-- 697784800 Hz...

Scanning plan at 2 -- HRC

-- 703785100 Hz...

------------------------

[snip] ----------------------------

Scanning plan at 2 -- HRC

-- 709785400 Hz...

Scanning plan at 1 -- EIA

-- 171000000 Hz...

Scanning plan at 1

-- EIA

-- 219000000

Hz...

Scanning plan at 1

-- EIA

-- 225000000

Hz...

Scanning plan at 1

-- EIA

-- 231012500

Hz...

CM/DocsisCtl> scan_stop

 

 

Instance: DOCSIS Control

Thread (0x80fcf840)

CM/DocsisCtl> Scanning plan at 1 -- EIA -- 237012500 Hz...

CM/DocsisCtl>

Chapter 6 Command Examples

60