P-971M User’s Guide

6.1.5 save

Syntax:

save

This command saves the current configuration. The following figure shows an example.

Figure 20 save Command Example

CM> save

Instance: BFC System (0x80ffba50)

Section 1 Non-Vol Settings successfully written to the device.

Section 2 Non-Vol Settings successfully written to the device.

CM>

6.1.6 logout

Syntax:

logout

This command exits from the CLI.

6.2 CM Command Examples

This section shows some CM command examples.

6.2.1 load_config

Syntax:

load_config <IpAddress> <Filename {127}>

This command gets a text based configuration from a TFTP server. After the upload process is complete, the device executes the commands line by line.

The following example gets a configuration file (config.txt) from the TFTP server (192.168.100.100).

55

Chapter 6 Command Examples