P-971M User’s Guide

This command pings a remote host. The following example sets the Prestige to ping a device with an IP address of 192.168.100.10.

Figure 23 ping Command Example

CM> ping 192.168.100.10

Instance: BFC System (0x80ffba50)

Reply from 192.168.100.10: Reply from 192.168.100.10: Reply from 192.168.100.10:

CM>

bytes=64 seq=0 time=0 ms TTL=128 bytes=64 seq=1 time=0 ms TTL=128 bytes=64 seq=2 time=0 ms TTL=128

6.2.4 telnet_pass

Syntax:

telnet_pass <Password{15}>

This command sets the Telnet administrator login password. After you log in for the first time, it is recommended you change the default administrator password.

The following example sets the Telnet administrator login password to “12345678” and saves the changes.

Figure 24 telnet_pass Command Example

CM> telnet_pass 12345678

Instance: BFC System (0x80ffba50)

CM> save

Instance: BFC System (0x80ffba50)

Section 1 Non-Vol Settings successfully written to the device.

Section 2 Non-Vol Settings successfully written to the device.

CM>

57

Chapter 6 Command Examples