Chapter 5 The Configuration Utility
Table 4 Configuration Screen (continued)
LABEL | DESCRIPTION |
MAC Address | This is a |
| are configuring. You can find the MAC address of your |
| on the bottom of your device. |
|
|
DAK Password | DAK (Device Access Key) password is used to verify that you are authorized to |
| perform changes on a remote device. You can find the DAK password printed on a |
| sticker on the bottom of your |
| Select the remote powerline adapter you want to manage by clicking the MAC |
| address which corresponds to it in the MAC Address column. Enter the DAK |
| Password value and click Save. |
| Note: You must enter the DAK Password value exactly as it is printed |
| on the label (all caps and with dashes |
|
|
Network Name | The default network name (sometimes called a network password or network |
| membership key (NMK)) of the |
| devices use the same network name to recognize and communicate with each other |
| over the powerline network. If you change the network name of one device on the |
| network, it will no longer be recognized as part of that network. |
| If you change the network name, make sure you change the network name for all of |
| the powerline adapters that you want to be part of your powerline network. |
| The network name can be from 8 to 64 characters in length, using “A”~”Z”, “a”~”z”, |
| “0”~”9”; spaces are not allowed. |
|
|
Save | Click this to apply your changes. The new Network Name is applied to the selected |
| powerline adapter. |
| Note: You must enter the correct DAK password for the selected |
| powerline adapter before you can make changes to it. |
5.4Firmware Screen
"To upgrade to the latest firmware, use the firmware upgrade tool available from the ZyXEL website (www.zyxel.com), or from the CD included with your
"Be sure to upload the correct model firmware as uploading the wrong model firmware may damage your device.
46 |
| |
| ||
|
|
|