ZyXEL Communications Product Specifications

A

Product Specifications

The following tables summarize the PLA-4xx’s hardware and firmware features.

Table 15 Hardware Specifications

Dimensions (W x D x H)	PLA-400/400 v2/402 v2
	112 (L) mm x 106 (D) mm x 28.5 (H) mm
	PLA-470
	162 (L) mm x 118 (D) mm x 40 (H) mm
	PLA470 v2
	162 (L) mm x 118 (D) mm x 35 (H) mm
	PLA-401/PLA401 v2
	97 mm (L) x 45 (H) mm x 70 (W) mm
Power Input	PLA-400/401 v2
	100 - 240 VAC, 50/60 Hz, 0.12 A
	PLA-400 v2/402 v2
	100 - 240 VAC, 50/60 Hz, 0.13 A
	PLA401/470/470 v2
	100 - 240 VAC, 50/60 Hz, 0.2 A
Ethernet Port	Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
	mode.
	Auto-crossover: Use either crossover or straight-through Ethernet cables.
RESET	Pressing this button in for less than 3 seconds resets the device to factory
	default settings. Network Name becomes HomePlugAV.
	Pressing this button in for more than 10 seconds resets the firmware to the
	previous version.
ENCRYPT	Pressing this button in for less than 3 seconds begins the connection setup
	process.
	Pressing this button in for more than 10 seconds resets the network name
	to a random value.
Coaxial Port	PLA 402 v2 only
Operation Environment	PLA-400/401/400 v2/470/470 v2
	Temperature: 0º C ~ 45º C
	Humidity: 5% ~ 95% Noncondensing
	PLA401 v2/PLA402 v2
	Temperature: 0º C ~ 45º C
	Humidity:10% ~ 85% Noncondensing
Storage Environment	PLA-400/401/400 v2/470/470 v2
	Temperature: -10º C ~ 70º C
	Humidity: 10% ~ 85% Noncondensing
	PLA401 v2/PLA402 v2
	Temperature: - 20º C ~ 60º C
	Humidity: 10% ~ 90% Noncondensing

	75
PLA-4xx Series User’s Guide