Appendix A Product Specifications
Table 15 Hardware Specifications
Cabling Type | ||
| 1 x Power Cord | |
| ||
| 1 x LAN UTP Category 5 or Better | |
| ||
| 1 x Coaxial Cable (RG6 or RG59 cable with 75 ohm impedance preferred | |
| but others are compatible. RG6 cables are common for CATV. | |
| connector required.) | |
| ||
| 4 x LAN UTP Category 5 or Better | |
|
| |
Network Interface | ||
| 1 x 200 Mbps Powerline port compliant with HomePlug AV standard | |
| ||
| 1 x 10/100M | |
| ||
| 4 x 10/100 M | |
| ||
| 1 x Coaxial Cable Port | |
|
| |
Distance between the | ||
centers of the holes on | 74 mm | |
the device’s back. | ||
| ||
| 115mm | |
| ||
| Not applicable | |
|
| |
Recommended type of | ||
screws for | M3 Tap Screw | |
| ||
| Not applicable | |
|
|
Table 16 Firmware Specifications
FEATURE | DESCRIPTION |
Powerline Functionality | The HomePlug AV standard specifies how network devices |
| communicate using standard electrical wiring. |
| It supports a data transfer rate of up to 200Mbps. |
| Data is encrypted using |
| HomePlug AV compatible devices |
| but do not detect each other. |
| The range of a HomePlug AV Powerline network is 300 meters/984 feet |
| in optimal conditions. |
| HomePlug AV is compatible with all OSs. |
| The maximum number of devices connected (bridged) to single |
| powerline adapter is 64. |
| The maximum number of powerline devices on a single network is 64. |
| The maximum number of powerline networks on a single electrical circuit |
| is 4. |
| HomePlug AV devices using version 3.0.5 firmware cannot |
| communicate with earlier version firmware. |
|
|
Coaxial Functionality | The range of a HomePlug AV Coaxial network is 800 meters/2624 feet in |
| optimal conditions. |
|
|
Encryption | |
|
|
76 |
| |
| ||
|
|
|