Chapter 6 Powerline Network Setup Tutorial
Figure 39 Local/Remote Adapters on a Powerline Network
3To set up a new powerline network, type the DAK Password and change the Network Name on all powerline adapters you wish to add to your network.
•Look for the DAK Password on a label on your powerline adapter. The DAK Password lets you access the adapter.
•Select the Remote adapter you want to add (A) and type the DAK Password in the DAK Password field (B).
•Then type the new network name in the Network Name field.
Figure 40 Adding an Adapter to Your New Network
A
B
4Click Save.
•If you do not type the DAK password or type it incorrectly either of the following pop- ups appear. Click OK and type the DAK Password correctly in the DAK Password field.
| 59 |
|
|