Appendix A Product Specifications
"See Table 15 on page 75 for the size of screws to use and how far apart to place them.
1Select a high position on a sturdy wall that is free of obstructions.
2Drill two holes for the screws. The distance between the centers of the holes is listed in the product specifications appendix.
Be careful to avoid damaging pipes or cables located inside the wall when drilling holes for the screws.
3Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm between the heads of the screws and the wall.
4Make sure the screws are snugly fastened to the wall. They need to hold the weight of the
5Align the holes on the back of the
Figure 48
78 |
| |
| ||
|
|
|