Chapter 2 The Web Configurator
2.2.2 Navigation Panel
The following table describes the menu items on the navigation panel.
Table 2 Navigation Panel Summary
LINK | TAB | FUNCTION |
Status |
| This screen shows the GPON Device’s general device and interface status |
|
| information. |
|
|
|
Network |
|
|
|
|
|
LAN | IP | Use this screen to configure your GPON Device’s LAN IP address and subnet |
|
| mask. |
|
|
|
Maintenance |
|
|
|
|
|
SLID | SLID | Use this screen to change your GPON Device’s Subscriber Location ID (SLID) |
|
| setting. The SLID identifies your device to the GPON service provider. |
|
|
|
System | General | Use this screen to configure your GPON Device’s name, management |
|
| inactivity timeout, and password. |
|
|
|
| Transceiver | Use this screen to view current status information for the GPON Device’s |
|
| optical transceiver and configure transceiver alarm thresholds. |
|
|
|
Logs | View Log | Use this screen to display your GPON Device’s logs. |
|
|
|
| Log Settings | Use this screen to select which logs the GPON Device records. |
|
|
|
Tools | Firmware | Use this screen to upload firmware to your GPON Device. |
|
|
|
| Configuration | Use this screen to backup and restore your GPON Device’s configuration |
|
| (settings) or reset the factory default settings. |
|
|
|
| Restart | Use this screen to reboot the GPON Device without turning the power off. |
|
|
|
2.2.3 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this document. The Status screen displays after you log in. See Chapter 3 on page 13 for details about the Status screen.
2.2.4 Status Bar
Check the status bar when you click Apply or OK to verify that the configuration has been updated.
12 |
|
|
|