Chapter 5 Maintenance
The following table describes the fields in this screen.
Table 5 Maintenance > SLID
LABEL | DESCRIPTION |
Enable SLID | Select this to have the GPON Device use the SLID to identify itself to the OLT. |
|
|
SLID Value | Enter the SLID used for gaining access to the service provider’s network. It is case- |
| sensitive, so make sure [Caps Lock] is not on. |
|
|
Apply | Click Apply to save your changes back to the GPON Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
5.3 General
Use this screen to configure the GPON Device’s system name, inactivity timer, and password. Click Maintenance > System to open the General screen.
Figure 10 Maintenance > System > General
The following table describes the labels in this screen.
Table 6 Maintenance > System > General
LABEL | DESCRIPTION |
General Setup |
|
|
|
System Name | Choose a descriptive name for identification purposes. Because some ISPs check this |
| name it is recommended you enter your computer’s “Computer name” in this field. This |
| name can be up to 30 alphanumeric characters long. Spaces are not allowed, but dashes |
| |
| • To find your computer’s name in Windows XP, click Start > My Computer > View |
| system information and then click the Computer Name tab. See the Full |
| computer name field. |
| • In Windows 7, click Start, right click Computer, and click Properties. See the entry |
| in the Full computer name field. |
|
|
18 |
|
|
|