Chapter 1 Introduction

1.5 The Reset Button

If you forget your password or cannot access the Web Configurator, you will need to use the RESET button at the back of the GPON Device to reload the factory-default configuration file. This means that you will lose all custom configuration and the password will be reset to the default.

1.5.1 Using the Reset Button

1Make sure the POWER LED is on (not blinking).

2To set the GPON Device back to the factory default settings, press the RESET button for more than three seconds and then release it. The LEDs flash and the GPON Device restores the defaults and restarts.

Note: Press the RESET button for less than one second to restart the GPON Device without changing it back to the factory default settings.

 

7

PMG1006-B20A User’s Guide