5

Maintenance

5.1Overview

Use the SLID screen (see Section 5.2 on page 17) to change your GPON Device’s Subscriber Location ID (SLID) setting.

Use the General screen (see Section 5.3 on page 18) to configure your GPON Device’s name, management inactivity timeout, and password.

Use the Transceiver screen (see Section 5.4 on page 19) to view current status information for the GPON Device’s optical transceiver and configure transceiver alarm thresholds.

Use the Logs screens (see Section 5.5 on page 20 and Section 5.6 on page 21) to display your GPON Device’s logs and select which logs to record.

Use the Tools screens (see Section 5.7 on page 22 through Section 5.10 on page 25) to upload new firmware, manage configuration files and restart your GPON Device.

5.2SLID

To change your GPON Device’s Subscriber Location ID (SLID) setting, click Maintenance > SLID. The screen appears as shown. The SLID identifies your device to the GPON service provider’s Optical Line Terminal (OLT). If your GPON service provider gave you an SLID to use, enter it in this screen.

Figure 9 Maintenance > SLID

 

17

PMG1006-B20A User’s Guide