4
LAN
4.1 Overview
This chapter describes how to configure LAN settings.
A Local Area Network (LAN) is a shared communication system to which many computers are attached. A LAN is a computer network limited to the immediate area, usually the same building or floor of a building.
4.2 IP
Click Network > LAN to open the IP screen. Use this screen to set the Local Area Network IP address and subnet mask of your GPON Device.
Figure 8 Network > LAN > IP
The following table describes the fields in this screen.
Table 4 Network > LAN > IP
LABEL | DESCRIPTION |
IP Address | Enter the LAN IP address you want to assign to your GPON Device in dotted decimal |
| notation, for example, 192.168.1.1 (factory default). |
|
|
IP Subnet Mask | Type the subnet mask of your network in dotted decimal notation, for example |
| 255.255.255.0 (factory default). Your GPON Device automatically computes the |
| subnet mask based on the IP address you enter, so do not change this field unless you |
| are instructed to do so. |
|
|
Apply | Click Apply to save your changes back to the GPON Device. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
| 15 |
|
|