Chapter 5 Maintenance
5.9.2 Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your computer to your GPON Device.
Table 11 Restore Configuration
LABEL | DESCRIPTION |
File Path | Type in the location of the file you want to upload in this field or click Browse ... to find it. |
|
|
Browse... | Click Browse... to find the file you want to upload. Remember that you must decompress |
| compressed (.ZIP) files before you can upload them. |
|
|
Upload | Click Upload to begin the upload process. |
|
|
After you see a “restore configuration successful” screen, you must then wait one minute before logging into the GPON Device again.
The GPON Device automatically restarts in this time causing a temporary network disconnect.
If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as the default GPON Device IP address shown on the cover.
If the upload was not successful, the following screen will appear. Click Return to go back to the Configuration screen.
5.9.3 Reset to Factory Defaults
Click the Reset button to clear all
5.10 Restart
System restart allows you to reboot the GPON Device without turning the power off. Click Maintenance > Tools > Restart. Click Restart to have the GPON Device reboot. This does not affect the GPON Device's configuration.
Figure 16 Maintenance > Tools > Restart
| 25 |
|
|