Appendix A Legal Information

Open Source Licenses

This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Open source licenses are provided with the firmware package. You can download the latest firmware at www.zyxel.com. To obtain the source code covered under those Licenses, please contact support@zyxel.com.tw to get it.

Safety Warnings

To avoid possible eye injury, do NOT look into an operating fiber-optic module’s connector.

Do NOT use this product near water, for example, in a wet basement or near a swimming pool.

Do NOT expose your device to dampness, dust or corrosive liquids.

Do NOT store things on the device.

Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

Connect ONLY suitable accessories to the device.

Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY qualified service personnel should service or disassemble this device. Please contact your vendor for further information.

Make sure to connect the cables to the correct ports.

Place connecting cables carefully so that no one will step on them or stumble over them.

Always disconnect all cables from this device before servicing or disassembling.

Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right supply voltage (for example, 110V AC in North America or 230V AC in Europe).

Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor or cord.

Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.

If the power adaptor or cord is damaged, remove it from the device and the power source.

Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.

Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.

Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.

If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged.

This product is for indoor use only (utilisation intérieure exclusivement).

Your product is marked with this symbol, which is known as the WEEE mark. WEEE stands for Waste Electronics and Electrical Equipment. It means that used electrical and electronic products should not be mixed with general waste.

"PRODUCT COMPLIES WITH 21 CFR 1040.10 AND 1040.11"

"PRODUIT CONFORME SELON 21CFR 1040.10 ET 1040.11"

CLASS 1 LASER PRODUCT APPAREIL À LASER DE CLASSE 1

32

 

PMG1006-B20A User’s Guide