where <ESC> is the escape character (ASCII 27) and the "VMS" must be in uppercase characters. Then insert this file into your default library (normally SYSDEVCTL.TLB), and specify it as a setup module in your form (stop and reset all queues that use the library before doing this procedure). For example:
$LIB/INS SYS$SYSROOT:[SYSLIB]SYSDEVCTL.TLB NOBL $DEF/FORM PCL/SETUP=NOBL
The above example inserts the file NOBL.TXT into the default library and then redefines the form PCL (previously defined in step 4) to eliminate blank pages.
Note: This procedure is not required for DECprint Supervisor (DCPS).
PATHWORKS for DOS Configuration
The instructions for configuring a PATHWORKS print queue depend on whether you have V4.X or V5.X.
PATHWORKS V5.X Server Setup Instructions:
To print from PATHWORKS V5.X, you must first create a LAN Manager printer destination, and then you must make it shareable. The procedure is as follows:
1.To create a LAN Manager printer destination, use one of the following methods (note that by default the printer name you supply also identifies the printer destination, a default LAN Manager print queue, and a VMS print queue):
