this file from diskette is to use the NFT (Network File Transfer) utility included with PATHWORKS, making sure that you copy in image mode with a maximum record size (MRS) of 512 bytes as shown in the following example:
COPY/IMAGE/MRS=512 A:XJET.BIN host::directory
where host is the name of the VAX host computer and directory is the VMS load directory (for example, VAX::SYS$SYSROOT:[MOM$SYSTEM]. Note that you must specify both /IMAGE and /MRS=512 because the copy command defaults to DOS stream mode and 128 byte records.
Make sure that the system logical MOM$LOAD is set correctly by verifying that the following line is in your site startup file:
$DEF/SYSTEM/EXEC/NOLOG MOM$LOAD - SYS$SYSROOT:[MOM$SYSTEM]
If there are other directories listed in the same command, add the server directory (if necessary) to the list separated by commas. If this command does not exist, type it in at the VMS "$" prompt and also add it to the startup file using the VMS editor.
Now use NCP or the serial port to access the print server remote console (refer to Appendix A if you do not know how to do this), and type:
SET LOAD SOFTWARE XJET.BIN
SET LOAD ENABLE
in response to the Local> prompt.
