port), BINARY_S1 (for the serial port), and BINARY_P2 or BINARY_S2 for the XConnect 100 second parallel and serial ports. Refer to Appendix B of the manual for additional information on using services.
10.Type in the StreetTalk name of the print queue you defined in step
11.Click on OK, and then click OK again to save the configuration.
12.Click OK and then OK again to exit XAdmin
D.Print Server Configuration Using the Print Server Console (Optional)
As an alternative to XAdmin, you may use the print server console to configure an TROY XCD print server. The steps are as follows:
1.Connect to the print server console using TELNET, NCP, XCONFIG, or the serial port (refer to Appendix A for information on using the console).
2.Execute the following commands:
SET BANyan LOgin loginname
Purpose: Sets StreetTalk login name of print server.
SET BANyan PAssword password
Purpose: Sets login password of print server. The password (if any) must match the password you set in step
