Husqvarna CZ4815KAA, CZ4817KOA manual To Transport See Fig

Page 15

OPERATION

•The slowest speed possible should be used before starting up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, pull drive levers into the neutral position and push to the outside of the unit and engage the park brake.

IMPORTANT: Control levers return to neutral when released. This may cause a sudden stop of the mower.

•To restart movement, release the park brake.

•Pull the control levers back to the center of the mower and press forward to regain forward motion.

•Make all turns slowly.

TO TRANSPORT (See Fig. 7)

When pushing or pulling the mower, be sure to engage the IZT (Integrated Zeroturn Transaxle) bypass linkages. The IZT bypass linkages are located on the rear of the frame, below the rear engine guard.

CAUTION

Do not tow this vehicle, it may cause dam- age to the drive system.

•Raise the deck into the highest cutting position.

•Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.

•To reengage the IZT’s to drive, reverse the above procedure.

WARNING

Do not tow any trailers, etc. with this mower. They may jackknife or overturn causing damage to the mower and possibly serious injury to the operator.

IZT BYPASS LINKAGE

FIGURE 7

HEAD INSIDE OF

REAR DECK

IZT BYPASS

LINKAGE IN

DRIVE POSITION

FIGURE 7A

HEAD OUTSIDE

OF REAR DECK

IZT BYPASS

LINKAGE IN

BYPASS POSITION

FIGURE 7B

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 968999220 / CZ4817KOA 968999219 / CZ4815KAATechnical Assistance Contents Safe Operation Practices for RIDE-ON Mowers Safety RulesGeneral Operation II. Slope OperationIII. Service III. ChildrenSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Customer Responsibilities SpecificationsBefore Removing Mower from the Skid AssemblyTools Required For Assembly To Remove the Mower from CrateControl Lever ARM HEX Bolts Neutral Slot Check the Tire Pressure ChecklistControls OperationHOW to USE Your Mower Deck BladesEngine To Adjust the Deck Cutting Height See Fig To Operate on Hills To Adjust ANTI-SCALPRollers See Figure To Operate MowerTo Transport See Fig ADD Gasoline Before Starting the EngineTo Start Engine See Fig Check Engine OIL LevelMowing Tips Before Each USE General RecommendationsTires Lubrication ChartOperator Presence System Blade CareTo Sharpen Blade See Fig BatteryBelts EngineLubrication Engine OIL Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas AIR FilterCleaning Service and Adjustment MowerTo Level Deck To Replace Deck Belt FRONT-TO-BACKADJUSTMENT See FigTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Remove Wheels for Repair To Adjust the Seat See FigTo Adjust Control Levers See Fig To Start AN Engine with a Weak BatteryTo Attach Jumper Cables To Adjust Park BrakeTracking Adjustment Engine OIL BatteryStorage Fuel SystemCylinders OtherProblem Cause Correction Troubleshooting PointsProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.
Top Page Image Contents