Husqvarna CZ4815KAA, CZ4817KOA manual Problemcausecorrection

Page 33

TROUBLESHOOTING POINTS

PROBLEMCAUSECORRECTION

Engine continues to 1. Faulty operator-safety presence control system. 1. Check wiring, switches and connections. If not

run when operator

 

 

 

corrected, contact an authorized service center/

leaves seat with

 

 

 

department.

attachment

 

 

 

 

 

 

 

 

 

Poor cut - uneven

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten blade bolt.

 

2.

Mower deck not level.

2.

Level mower deck.

 

3.

Buildup of grass, leaves, and trash under mower.

3.

Clean underside of mower housing.

 

4.

Bent cutter housing.

4.

Replace cutter housing.

 

5.

Clogged mower deck vent holes from buildup of

5.

Clean around cutter housing to open vent holes.

 

 

grass, leaves, and trash around cutter housing.

 

 

Mower blades will not rotate

1.Obstruction in clutch mechanism.

2.Worn/damaged mower drive belt.

3.Frozen idler pulley.

4.Frozen cutter housing.

1.Remove obstruction.

2.Replace mower drive belt.

3.Replace idler pulley.

4.Replace cutter housing.

Poor grass discharge

1.Engine speed too slow.

2.Travel speed too fast.

3.Wet grass

4.Mower deck not level.

5.Low/uneven tire air pressure.

6.Worn, bent or loose blade.

7.Buildup of grass, leaves and trash under mower.

8.Mower drive belt worn.

9.Blades improperly installed.

10.Improper blades used.

11.Clogged mower deck vent holes from buildup of grass, leaves and trash around cutter housing.

1.Place throttle control in "FAST" position.

2.Shift to slower speed.

3.Allow grass to dry before mowing.

4.Level mower deck.

5.Check tires for proper air pressure.

6.Replace/sharpen blade. Tighten blade bolt.

7.Clean underside of mower housing.

8.Replace mower drive belt.

9.Reinstall blades sharp edge down.

10.Replace with blades listed in this manual.

11.Clean around cutter housing to open bent holes.

Battery will not charge

1.Bad battery cell(s).

2.Poor cable connections.

3.Faulty regulator (if so equipped).

4.Faulty alternator.

1.Replace battery.

2.Check/clean all connections.

3.Replace regulator.

4.Replace alternator.

Loss of drive

1.

IZT bypass linkages in bypass position.

 

 

 

2.

IZT belt worn, damaged, or broken.

1.Place IZT bypass linkages in drive in "engaged" position.

2.Replace IZT belt.

Engine "backfires" when turning engine "OFF"

1.Engine throttle control not set at "SLOW" position for 30 seconds before stopping engine.

1.Move throttle control to "SLOW" position and allow to idle for 30 seconds before stopping engine.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents 968999220 / CZ4817KOA 968999219 / CZ4815KAATechnical Assistance Contents General Operation Safety RulesII. Slope Operation Safe Operation Practices for RIDE-ON MowersIII. Service III. ChildrenSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Customer Responsibilities SpecificationsTools Required For Assembly AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Check the Tire Pressure ChecklistControls OperationHOW to USE Your Mower Deck BladesEngine To Adjust the Deck Cutting Height See Fig Rollers See Figure To Adjust ANTI-SCALPTo Operate Mower To Operate on HillsTo Transport See Fig To Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Before Each USE General RecommendationsOperator Presence System Lubrication ChartBlade Care TiresTo Sharpen Blade See Fig BatteryBelts EngineLubrication Clean AIR INTAKE/COOLING Areas Clean AIR ScreenAIR Filter Engine OIL FilterCleaning Service and Adjustment MowerTo Level Deck To Replace Deck Belt FRONT-TO-BACKADJUSTMENT See FigTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust Control Levers See Fig To Adjust the Seat See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Attach Jumper Cables To Adjust Park BrakeTracking Adjustment Storage BatteryFuel System Engine OILCylinders OtherProblem Cause Correction Troubleshooting PointsProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.
Top Page Image Contents