Husqvarna CZ4815KAA, CZ4817KOA Tools Required For Assembly, To Remove the Mower from Crate

Page 8

ASSEMBLY

Your new mower has been assembled at the factory with the exception of those parts left un- assembled for shipping purposes. To ensure safe and proper operation of your mower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.

TOOLS REQUIRED

FOR ASSEMBLY

1.9/16" wrench or 9/16" socket w/ drive ratchet

2.Tire pressure gauge

3.Nail bar or claw hammer

4.Wire snips

When right or left hand is mentioned in this manual, it means when you are in the operating position (seated).

TO REMOVE THE MOWER FROM CRATE

UNPACK CRATE

•Using the nail bar or hammer, remove the top of the crate first. Then remove the sides of the crate and place these out of the way. Be careful of any exposed nails or staples.

•Remove the plastic bag that covers the mower.

•Using the wire snips, cut any plastic ties that are holding the mower to the crate.

•Remove the seat off of the front of the mower and place in a safe location.

BEFORE REMOVING THE

MOWER FROM THE SKID

ATTACH SEAT (See Fig. 1)

The seat position should be adjusted forward or backward so that the operator can comfortably reach the deck lift pedal and safely operate the mower. See "Service and Adjustment" Section of this manual.

•Remove protective wrap from the seat.

•Remove the three prong knobs and washers from the seat and place in the storage area in the right side console.

•Raise the seat pan up so that the bottom can be easily accessed.

•Securing one of the three prong knobs and washers, insert it thru the seat pan slot and into the corresponding threaded hole in the seat bottom.

•Repeat for the other three holes.

•Tighten the three prong knobs in the approximate position desired for the seat.

•Connect the wiring harness to the seat

switch.

Adjustments may be required to position the seat in the desired position. Refer to the "Service and Adjustment" section of this manual.

SEAT PAN

KNOBS

WIRE

HARNESS

FIGURE 1

ATTACH CONTROL LEVERS (See Fig. 2)

•Using the 9/16" wrench or socket and ratchet, remove the bottom hex bolt and spring washer from the control arm.

•Rotate the control lever up until the bolt and spring washer can be placed thru the slot in the bottom of the control lever and threaded back into the control arm.

•Center the hex bolt in the slot on the control lever. Using the wrench or ratchet, tighten both the top and bottom hex bolts.

•Repeat on opposite side of the mower.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents 968999219 / CZ4815KAA 968999220 / CZ4817KOATechnical Assistance Contents Safety Rules General OperationII. Slope Operation Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not III. ServiceIII. Children Safety Rules Specifications Customer ResponsibilitiesAssembly Tools Required For AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureOperation ControlsEngine HOW to USE Your MowerDeck Blades To Adjust the Deck Cutting Height See Fig To Adjust ANTI-SCALP Rollers See FigureTo Operate Mower To Operate on HillsTo Transport See Fig Before Starting the Engine To Start Engine See FigCheck Engine OIL Level ADD GasolineMowing Tips General Recommendations Before Each USELubrication Chart Operator Presence SystemBlade Care TiresBattery To Sharpen Blade See FigLubrication BeltsEngine Clean AIR Screen Clean AIR INTAKE/COOLING AreasAIR Filter Engine OIL FilterCleaning To Level Deck Service and AdjustmentMower FRONT-TO-BACKADJUSTMENT See Fig To Replace Deck BeltTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust the Seat See Fig To Adjust Control Levers See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Adjust Park Brake To Attach Jumper CablesTracking Adjustment Battery StorageFuel System Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.
Top Page Image Contents