Husqvarna CZ4815KAA, CZ4817KOA manual III. Children, III. Service

Page 5

SAFETY RULES

SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS

DO NOT:

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-off, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced trac- tion could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

III. CHILDREN

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

NEVER allow children to operate the machine.

Keep children out of the mowing area and under the watchful care of another respon- sible adult.

Be alert and turn off the machine if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe machine operation.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

III.SERVICE

The operation of any mower can result in foreign objects thrown into the eyes, which

`can result in severe eye damage. Always wear safety glasses or eye shields while operating your mower or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or

standard safety glasses.

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

-Use only an approved container.

-Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

-Never refuel the machine indoors.

-Never store the machine or fuel container inside where there is an open flame, such as a water heater.

Never run a machine inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check there proper operation regularly.

Keep machine free of grass, leaves, or other debris buildup. Clean oil or fuel spillage. Allow machine to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with manufacturer’s recom- mended parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Check brake operation frequently. Adjust and service as required.

5

Image 5
Contents 968999220 / CZ4817KOA 968999219 / CZ4815KAATechnical Assistance Contents General Operation Safety RulesII. Slope Operation Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not III. ServiceIII. Children Safety Rules Customer Responsibilities SpecificationsTools Required For Assembly AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Check the Tire Pressure ChecklistControls OperationEngine HOW to USE Your MowerDeck Blades To Adjust the Deck Cutting Height See Fig Rollers See Figure To Adjust ANTI-SCALPTo Operate Mower To Operate on HillsTo Transport See Fig To Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Before Each USE General RecommendationsOperator Presence System Lubrication ChartBlade Care TiresTo Sharpen Blade See Fig BatteryLubrication BeltsEngine Clean AIR INTAKE/COOLING Areas Clean AIR ScreenAIR Filter Engine OIL FilterCleaning To Level Deck Service and AdjustmentMower To Replace Deck Belt FRONT-TO-BACKADJUSTMENT See FigTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust Control Levers See Fig To Adjust the Seat See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Attach Jumper Cables To Adjust Park BrakeTracking Adjustment Storage BatteryFuel System Engine OILCylinders OtherProblem Cause Correction Troubleshooting PointsProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.