Husqvarna CZ4815KAA, CZ4817KOA manual To Replace Deck Belt, FRONT-TO-BACKADJUSTMENT See Fig

Page 25

SERVICE AND ADJUSTMENT

FRONT-TO-BACKADJUSTMENT (See Fig. 16).

IMPORTANT: DECK MUST BE LEVEL SIDE- TO-SIDE. IF THE FOLLOWING FRONT-TO- BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT OR BOTH REAR LINKAGES EQUALLY SO THE DECK WILL STAY LEVEL.

To obtain the best cutting performance, the deck should be adjusted so the front tip of the blades are approximately 1/8" to 1/4" lower than the rear tip. If the front tip is higher, this will create a poor quality of cut.

BB

FIGURE 16

WARNING

Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.

Check adjustment on the right side of the mower. Position any blade so that the tip is pointing straight forward. Measure distance “B” at the front and rear tip of the blade.

•Before making any necessary adjustments, check to make sure that the deck is level side-to-side.

•With the deck in the highest cutting position, (4 1/2") measure the front tip of the blade to see if the deck is higher or lower than 4 1/2".

•To lower the front tip of the blade, using a 9/16" wrench, loosen the hex nuts that are on the front lift linkages (be sure to loosen equal amounts).

•When distance “B” is 1/8" to 1/4" lower at the front than rear the adjustment is done.

•Reverse above step to raise the deck.

TO REPLACE DECK BELT

DECK BELT REMOVAL (See Fig. 17 and 18)

•Park on a level surface. Apply park brake.

•Lower the deck into the lowest cutting position

•Disengage the tension relief lever from the lock bracket.

WARNING

Lever is spring loaded. Have a tight grip on the lever and release slowly.

•Remove screws from both the left and right belt shields, and remove shields.

•Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface.

•Carefully roll the belt over the top of the cutter housing pulleys.

•Remove the belt from around the electric clutch on the engine shaft.

•The belt can now be removed.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents 968999220 / CZ4817KOA 968999219 / CZ4815KAATechnical Assistance Contents General Operation Safety RulesII. Slope Operation Safe Operation Practices for RIDE-ON MowersIII. Children III. ServiceSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Customer Responsibilities SpecificationsTools Required For Assembly AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Check the Tire Pressure ChecklistControls OperationDeck Blades HOW to USE Your MowerEngine To Adjust the Deck Cutting Height See Fig Rollers See Figure To Adjust ANTI-SCALPTo Operate Mower To Operate on HillsTo Transport See Fig To Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD GasolineMowing Tips Before Each USE General RecommendationsOperator Presence System Lubrication ChartBlade Care TiresTo Sharpen Blade See Fig BatteryEngine BeltsLubrication Clean AIR INTAKE/COOLING Areas Clean AIR ScreenAIR Filter Engine OIL FilterCleaning Mower Service and AdjustmentTo Level Deck To Replace Deck Belt FRONT-TO-BACKADJUSTMENT See FigTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust Control Levers See Fig To Adjust the Seat See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Attach Jumper Cables To Adjust Park BrakeTracking Adjustment Storage BatteryFuel System Engine OILCylinders OtherProblem Cause Correction Troubleshooting PointsProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.
Top Page Image Contents