Husqvarna CZ4815KAA, CZ4817KOA manual To Adjust the Seat See Fig, To Adjust Control Levers See Fig

Page 27

SERVICE AND ADJUSTMENT

TO ADJUST THE SEAT (See Fig. 1)

•Move the control levers into the neutral position and rotate to the outside of the machine.

•Lift up on the back of the seat and rotate it forward.

•Loosen the three prong knobs on the bottom of the seat and move the seat to the desired position.

•Tighten the three prong knobs and rotate seat back to the operating position.

TO ADJUST CONTROL LEVERS (See Fig. 2)

Sitting on the seat, in the operators position, press both control levers forward. If both control levers line up with each other, then no adjustment is needed. If they do not line up, follow instructions below.

•Identify which control lever moves further forward.

•Using a 9/16" wrench, slightly loosen the bottom hex bolt (about 1/2 turn) on the opposite control lever.

•Move both control levers to the front again and apply more pressure to the control lever that you loosened to bring the two control levers in line with each other.

•Tighten hex bolts.

TO REMOVE WHEELS FOR REPAIR

FRONT CASTER TIRES

•Park mower on a level surface and apply park brake.

•Jack up the front end of the mower.

•Using a 3/4" wrench and/or socket w/ drive ratchet, remove hex nut and hex bolt from the caster fork.

•Remove the tire from the fork.

•Remove the spacer from the inside of the caster rim.

•Repair tire

•Reassemble in the reverse order of the previous steps.

REAR TIRES

IMPORTANT: Block front tires to prevent the mower from rolling.

•Park mower on a level surface and apply park brake.

•Jack up the rear end of the mower on the side of the damaged tire.

•Remove 4 lug nuts to allow wheel removal

•Repair tire.

•Reassemble in reverse order of previous steps

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealer also prevents tire dry rot and corrosion.

TO START AN ENGINE WITH A WEAK BATTERY

WARNING

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If you battery is too weak to start the engine, it should be recharged. (See “BATTERY” in the Customer Responsibilities section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR MOWER IS EQUIPPED WITH A 12-VOLT NEGATIVE GROUNDED SYSTEM. THE OTHER VEHICLE MUST ALSO BE A 12-VOLT NEGATIVE GROUNDED SYSTEM. DO NOT USE YOUR MOWER BATTERY TO START OTHER VEHICLES.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 968999220 / CZ4817KOA 968999219 / CZ4815KAATechnical Assistance Contents Safe Operation Practices for RIDE-ON Mowers Safety RulesGeneral Operation II. Slope OperationIII. Service III. ChildrenSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Customer Responsibilities SpecificationsBefore Removing Mower from the Skid AssemblyTools Required For Assembly To Remove the Mower from CrateControl Lever ARM HEX Bolts Neutral Slot Check the Tire Pressure ChecklistControls OperationHOW to USE Your Mower Deck BladesEngine To Adjust the Deck Cutting Height See Fig To Operate on Hills To Adjust ANTI-SCALPRollers See Figure To Operate MowerTo Transport See Fig ADD Gasoline Before Starting the EngineTo Start Engine See Fig Check Engine OIL LevelMowing Tips Before Each USE General RecommendationsTires Lubrication ChartOperator Presence System Blade CareTo Sharpen Blade See Fig BatteryBelts EngineLubrication Engine OIL Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas AIR FilterCleaning Service and Adjustment MowerTo Level Deck To Replace Deck Belt FRONT-TO-BACKADJUSTMENT See FigTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Remove Wheels for Repair To Adjust the Seat See FigTo Adjust Control Levers See Fig To Start AN Engine with a Weak BatteryTo Attach Jumper Cables To Adjust Park BrakeTracking Adjustment Engine OIL BatteryStorage Fuel SystemCylinders OtherProblem Cause Correction Troubleshooting PointsProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.
Top Page Image Contents