Husqvarna CZ4815KAA, CZ4817KOA manual Service and Adjustment, Mower, To Level Deck

Page 24

SERVICE AND ADJUSTMENT

WARNING

BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:

•Set park brake to engaged position.

•Place PTO switch in the disengaged position (pressed down).

•Turn ignition key "OFF" and remove the key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place the wire where it cannot come in contact with the plug.

and rear lift linkages (be sure to tighten equal amounts).

•To lower one side of the deck, reverse previous step.

•Recheck measurements after adjustment.

A

 

A

FIGURE 14

MOWER

TO LEVEL DECK

Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure (see “SPECIFICATIONS” section in this manual). If tires are under or over inflated, you can not properly adjust your deck.

NOTE: It may be easier to adjust the front lift linkages by removing the floor pan before any adjustments are made

SIDE-TO-SIDE ADJUSTMENT (See Figs. 14 and 15)

•Raise the deck into the highest cutting position (4 1/2")

•Measure height from the bottom edge of the deck to the ground at both front corners. Distance “A” at both corners should be the same.

•If adjustment is necessary, make adjustment to one side the deck only

•To raise one side of the deck, using a 9/16" wrench, tighten the hex nuts on both the front

HEX NUT

FRONT LIFT

LINKAGE

FIGURE 15

REAR LIFT

LINKAGE

HEX NUT

FIGURE 15A

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 968999219 / CZ4815KAA 968999220 / CZ4817KOATechnical Assistance Contents Safety Rules General OperationII. Slope Operation Safe Operation Practices for RIDE-ON MowersIII. Service III. ChildrenSafe Operation Practices for RIDE-ON Mowers Do not Safety Rules Specifications Customer ResponsibilitiesAssembly Tools Required For AssemblyTo Remove the Mower from Crate Before Removing Mower from the SkidControl Lever ARM HEX Bolts Neutral Slot Checklist Check the Tire PressureOperation ControlsHOW to USE Your Mower Deck BladesEngine To Adjust the Deck Cutting Height See Fig To Adjust ANTI-SCALP Rollers See FigureTo Operate Mower To Operate on HillsTo Transport See Fig Before Starting the Engine To Start Engine See FigCheck Engine OIL Level ADD GasolineMowing Tips General Recommendations Before Each USELubrication Chart Operator Presence SystemBlade Care TiresBattery To Sharpen Blade See FigBelts EngineLubrication Clean AIR Screen Clean AIR INTAKE/COOLING AreasAIR Filter Engine OIL FilterCleaning Service and Adjustment MowerTo Level Deck FRONT-TO-BACKADJUSTMENT See Fig To Replace Deck BeltTo Replace IZT Integrated Zeroturn Transaxle Belt See Fig To Adjust the Seat See Fig To Adjust Control Levers See FigTo Start AN Engine with a Weak Battery To Remove Wheels for RepairTo Adjust Park Brake To Attach Jumper CablesTracking Adjustment Battery StorageFuel System Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Wiring Schematic

CZ4815KAA, CZ4817KOA specifications

The Husqvarna CZ4815KAA and CZ4817KOA are standout models in Husqvarna's robust line of zero-turn mowers, designed to cater to homeowners and professional landscapers alike. Both models exemplify reliability, performance, and ease of use, making them ideal for a wide range of lawn care applications.

One of the main features of the CZ4815KAA is its powerful engine. Equipped with a high-performance Kawasaki engine, the CZ4815KAA delivers robust power and superior torque, ensuring smooth operation even on challenging terrains. The 48-inch cutting deck is fabricated for durability and features a unique design that optimizes airflow, resulting in a cleaner and more precise cut. This model also incorporates a dual-blade system, which enhances cutting efficiency and enables users to achieve the desired lawn height with ease.

On the other hand, the CZ4817KOA steps up the game with a slightly larger cutting deck of 54 inches. This model is powered by a similarly impressive Kawasaki engine, delivering exceptional performance for larger properties. The enhanced deck size of the CZ4817KOA allows for wider cutting paths, reducing mowing time and maximizing efficiency. Both models have a cutting height adjustment feature that allows operators to easily modify the cutting height based on personal preference or lawn conditions.

Ergonomics play a crucial role in these mowers, as both the CZ4815KAA and CZ4817KOA feature comfortable, adjustable seats and ergonomically designed levers for intuitive control. This design ensures that even long mowing sessions are manageable and fatigue-free. In addition, the zero-turn capability allows for tight turns and navigating around obstacles, making these mowers exceptionally agile.

Another significant characteristic is the advanced technology integrated into both models. The user-friendly control panel provides operators with essential information at a glance, such as fuel levels and oil status, promoting proactive maintenance. Additionally, the overall construction of these mowers features rust-resistant materials and a sturdy frame, promising longevity and resilience in various weather conditions.

Overall, the Husqvarna CZ4815KAA and CZ4817KOA elevate the standard for zero-turn mowers, offering features and technologies that cater to both efficiency and comfort. Whether you're a weekend warrior or a full-time landscaper, these mowers are designed to make lawn care accessible and enjoyable.
Top Page Image Contents