Husqvarna 535RX Is running or the cutting equipment is, Rotating, as this can result in serious

Page 23

WORKING TECHNIQUES

!

WARNING! Neither the operator of the

machine nor anyone else may attempt to

 

 

remove the cut material while the engine

 

is running or the cutting equipment is

 

rotating, as this can result in serious

 

injury.

Stop the engine and cutting equipment before you remove material that has wound around the blade shaft as otherwise there is a risk of injury. The bevel gear can get hot during use and may remain so for a while afterwards.You could get burnt if you touch it.

!

WARNING! Watch out for thrown objects.

Always wear approved eye protection.

 

 

Never lean over the cutting attachment

 

guard. Stones, rubbish, etc. can be thrown

 

up into the eyes causing blindness or

 

serious injury.

Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches. Never swing the machine around without first checking behind you to make sure no-one is within the safety zone.

!

WARNING! Sometimes branches or

grass get caught between the guard and

 

 

cutting attachment. Always stop the

 

engine before cleaning.

Working methods

!

WARNING! Machines fitted with saw

blades or grass blades can be thrown

 

 

violently to the side when the blade comes

 

into contact with a fixed object. This is

 

called blade thrust. A blade thrust can be

 

violent enough to cause the machine and/

 

or operator to be propelled in any

 

direction, and possibly lose control of the

 

machine. Blade thrust can occur without

 

warning if the machine snags, stalls or

 

binds. Blade thrust is more likely to occur

 

in areas where it is difficult to see the

 

material being cut.

 

Avoid cutting with the area of the blade

 

between the 12 o’clock and 3 o’clock

 

positions. Because of the speed of

 

rotation of the blade, blade thrust can

 

occur if you attempt to cut thick stems

 

with this area of the blade.

•Before you start clearing, check the clearing area, the type of terrain, the slope of the ground, whether there are stones, hollows etc.

•Start at whichever end of the area is easiest, and clear an open space from which to work.

•Work systematically to and fro across the area, clearing a width of around 4-5 m on each pass. This exploits the full reach of the machine in both directions and gives the operator a convenient and varied working area to work in.

•Clear a strip around 75 m long. Move your fuel can as work progresses.

•On sloping ground you should work along the slope. It is much easier to work along a slope than it is to work up and down it.

•You should plan the strip so that you avoid going over ditches or other obstacles on the ground. You should also orient the strip to take advantage of wind conditions, so that cleared stems fall in the cleared area of the stand.

English – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 535RX, 535RXT Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the brush cutter? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipment535RX, 535RXT Stop switchCutting attachment guard Vibration damping systemMuffler Quick releaseCutting equipment Cutting equipmentLocking nut Sharpening the saw blade Sharpening grass cutters and grass bladesTrimmer head Attachment without an approved guard AssemblySee the chapter on Technical data. If an Fitting the guard extensionFitting the blade guard and saw blade Fitting a blade guard, grass blade and grass cutterFitting other guards and cutting attachments Triobalance harness Adjusting the harness and brush cutterStandard harness Correct balance Fuel Fuel safetyFuel Handling Use. This also applies during idling. Be FuelingMixing Muffler gets very hot during and afterStarting Starting and StoppingCheck before starting Starting and stoppingStopping For throttle handles with a start throttle lockABC of clearing Basic safety rulesWorking Techniques General working instructionsRotating, as this can result in serious Up into the eyes causing blindness orAreas where it is difficult to see Is running or the cutting equipment isBrush cutting with a saw blade Forestry clearing using a saw bladeClearing Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburetor MaintenanceBevel gear MufflerCooling system Oiling the air filter Cleaning the air filterAir filter Spark plugMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Auto Trimmy SII Page Page Original instructions 1154017-95

535RX, 535RXT specifications

The Husqvarna 535RXT and 535RX are advanced professional-grade string trimmers designed to tackle tough landscaping tasks with efficiency and precision. Renowned for their powerful performance and innovative features, these trimmers are ideal for both commercial landscapers and dedicated homeowners looking for superior reliability and durability.

One of the standout features of the 535RXT and 535RX is their powerful engine technology. Equipped with a 34.6 cc X-Torq engine, these trimmers deliver high performance with reduced fuel consumption and lower emissions, aligning with eco-friendly practices. The X-Torq engine ensures optimal torque and power, making it easy to cut through thick grass and dense vegetation.

Both models are equipped with an ergonomic handle that enhances comfort and reduces user fatigue during prolonged use. The adjustable harness and the lightweight design make maneuvering easier, which is especially advantageous during long hours of operation. This thoughtful ergonomics allows for efficient trimming without compromising on operator comfort.

Versatility is another key characteristic of the Husqvarna 535RXT and 535RX. They are equipped with the patented Smart Start technology, which simplifies the starting process. This feature minimizes resistance in the starter cord, allowing the engine to start quickly with less effort. As a result, users will spend less time preparing to work and more time on the task at hand.

The trimmers come with a robust 2-line cutting system that efficiently handles various types of grass and vegetation. The efficient cutting action leads to cleaner cuts and less wear on the machine. Adjusting the length of the cutting line is straightforward and helps in maintaining high productivity during trimming sessions.

Safety is a consideration in the design of the 535RXT and 535RX models. The trimmers feature a guard that protects the working parts and helps prevent debris from flying towards the operator. Furthermore, the anti-vibration system significantly reduces vibrations experienced by the user, leading to increased comfort and reduced risk of operator fatigue during extended use.

Overall, the Husqvarna 535RXT and 535RX offer powerful performance, user-friendly features, and impressive versatility. Whether for professional landscaping or residential upkeep, these trimmers stand as reliable choices for anyone looking to maintain their outdoor spaces with precision and care. With a commitment to innovation and quality, Husqvarna continues to lead in the outdoor equipment industry, making these models a worthy investment for serious users.
Top Page Image Contents