Husqvarna manual Stop switch, Cutting attachment guard, Vibration damping system, 535RX, 535RXT

Page 8

GENERAL SAFETY PRECAUTIONS

be checked. See instructions under the heading Maintenance.

Stop switch

Use the stop switch to switch off the engine.

Start the engine and make sure the engine stops when you move the stop switch to the stop setting.

Cutting attachment guard

This guard is intended to prevent loose objects from being thrown towards the operator. The guard also protects the operator from accidental contact with the cutting attachment.

Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked.

Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data.

WARNING! Never use a cutting

! attachment without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is ﬁtted this can cause serious personal injury.

Vibration damping system

Your machine is equipped with a vibration damping system that is designed to reduce vibration and make operation easier.

Using incorrectly wound cord or a blunt or incorrect cutting attachment (wrong type or incorrectly ﬁled, see instructions under the heading Filing the blade) increases the level of vibration.

The machine′s vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machine′s handle unit.

Regularly check the vibration damping units for cracks or deformation.

535RX, 535RXT

Check that the vibration damping element is undamaged and securely attached.

8 – English

Image 8

Contents 535RX, 535RXT KEY to Symbols SymbolsContents Introduction Dear customer What is WHAT? What is what on the brush cutter?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutStop switch Cutting attachment guardVibration damping system 535RX, 535RXTQuick release MufﬂerCutting equipment Cutting equipmentLocking nut Sharpening grass cutters and grass blades Sharpening the saw bladeTrimmer head Assembly See the chapter on Technical data. If anFitting the guard extension Attachment without an approved guardFitting a blade guard, grass blade and grass cutter Fitting the blade guard and saw bladeFitting other guards and cutting attachments Triobalance harness Adjusting the harness and brush cutterStandard harness Correct balance Fuel Fuel safetyFuel Handling Fueling MixingMufﬂer gets very hot during and after Use. This also applies during idling. BeStarting and Stopping Check before startingStarting and stopping StartingFor throttle handles with a start throttle lock StoppingBasic safety rules Working TechniquesGeneral working instructions ABC of clearingUp into the eyes causing blindness or Areas where it is difﬁcult to seeIs running or the cutting equipment is Rotating, as this can result in seriousForestry clearing using a saw blade Brush cutting with a saw bladeGrass clearing using a grass blade Grass trimming with a trimmer headTrimming ClearingCutting SweepingMaintenance CarburetorBevel gear MufﬂerCooling system Cleaning the air ﬁlter Air ﬁlterSpark plug Oiling the air ﬁlterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T45, T45x Auto Trimmy SII Page Page Original instructions 1154017-95