Husqvarna 143R-II manual Key To Symbols, The operator of the machine must

Page 2
KEY TO SYMBOLS

KEY TO SYMBOLS

Symbols

WARNING! A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

A protective helmet where there is a risk of falling objects

Approved hearing protection

Approved eye protection

Max. speed of output shaft, rpm

This product is in accordance with applicable EC directives.

Wear sturdy, non-slip boots.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Watch out for thrown objects and ricochets.

Visual check.

The operator of the machine must

 

 

ensure, while working, that no

15 m

15 m

persons or animals come closer than

50FT

50FT

15 metres.

Machines fitted with saw blades or

grass blades can be thrown violently

to the side when the blade comes into contact with a fixed object.This is called blade thrust. The blade is capable of amputating an arm or leg.

Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Approved eye protection must always be used.

2 – English

Image 2
Contents Page The operator of the machine must KEY TO SYMBOLSSymbols ensure, while working, that noKEY TO SYMBOLS CONTENTSContents CONTENTSINTRODUCTION WHAT IS WHAT? What is what on the brushcutter?Personal protective equipment GENERAL SAFETY PRECAUTIONSWARNING! Listen out for warning signals WARNING! The ignition system of thisWARNING! Never use a machine with Machine′s safety equipmentThrottle lockout Vibration damping system Stop switchCutting attachment guard WARNING! Never use a cuttingLocking nut Quick releaseMuffler WARNING! The inside of the mufflerCutting equipment WARNING! Using an incorrect cuttingCutting equipment Sharpening grass cutters and grass bladesTrimmer head Fitting the main body ASSEMBLYConnecting throttle cable and stop switch wires Assembling the handlebar and throttleFitting blades and trimmer heads 1-2mmG E F D B C Fitting the guard extensionFitting the trimmer guard and trimmer head H L M C BA AM LFitting the transport guard Adjusting the harness and clearing sawWARNING! When using a clearing saw it Standard harnessFUEL HANDLING Fuel safetyWARNING! Take care when handling fuel FuelMixing precautions, will lessen the risk of fireFuelling WARNING! Taking the followingStarting and stopping STARTING AND STOPPINGCheck before starting Startingstarter cord around your hand WARNING! When the engine is startedStopping General working instructions Basic safety rulesWORKING TECHNIQUES WARNING! Neither the operator of theGrass trimming with a trimmer head Grass clearing using a grass bladeBasic working techniques WARNING! Sometimes branches orCutting SweepingCarburettor MAINTENANCEAdjusting the idle speed T MufflerFuel filter Cleaning the air filterAir filter Bevel gearmaintenance Maintenance scheduleMaintenance DailyTechnical data TECHNICAL DATATechnical data WeightApplies to Europe only Approved accessoriesEC-declarationof conformity TypePage 15 cm 8,5 m 28 10 cm 4,2 mClic 2,4-2,7 mm4,25 m 2,4-2,7mm095-.106 T35, T35x 8,5 m 28 10 cm 4,3 m2,7-3,3 mm T45, T45x10 m 32 10 cm 4,3 m B 8 m / 26’ T55xA 2,7 - 4,0 mm C 15 cm7,0 m Trimmy SII095-.130 12 cm