Husqvarna 143R-II Contents, Note the following before starting, Key To Symbols, Introduction

Page 3

CONTENTS

CONTENTS

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear Customer,	4
WHAT IS WHAT?
What is what on the brushcutter?	5
GENERAL SAFETY PRECAUTIONS
Important	6
Personal protective equipment	6
Machine′s safety equipment	7
Cutting equipment	10
ASSEMBLY
Fitting the main body	12
Assembling the handlebar and throttle	12
Connecting throttle cable and stop switch wires ...	12
Fitting blades and trimmer heads	13
Fitting the transport guard	15
Adjusting the harness and clearing saw	15
Standard harness	15
FUEL HANDLING
Fuel safety	16
Fuel	16
Fuelling	17
STARTING AND STOPPING
Check before starting	18
Starting and stopping	18
WORKING TECHNIQUES
General working instructions	20
MAINTENANCE
Carburettor	23
Mufﬂer	23
Cooling system	23
Air ﬁlter	24
Fuel ﬁlter	24
Bevel gear	24
Spark plug	24
Maintenance schedule	25
TECHNICAL DATA
Technical data	26
EC-declaration of conformity	27

Note the following before starting:

Please read the operator’s manual carefully.

WARNING! Long-term exposure to noise

! can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may

! the design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

WARNING! A clearing saw, brushcutter

! or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

English – 3

Image 3

Contents Page ensure, while working, that no KEY TO SYMBOLSSymbols The operator of the machine mustCONTENTS CONTENTSContents KEY TO SYMBOLSINTRODUCTION What is what on the brushcutter? WHAT IS WHAT?WARNING! The ignition system of this GENERAL SAFETY PRECAUTIONSWARNING! Listen out for warning signals Personal protective equipmentMachine′s safety equipment Throttle lockoutWARNING! Never use a machine with WARNING! Never use a cutting Stop switchCutting attachment guard Vibration damping systemWARNING! The inside of the mufﬂer Quick releaseMufﬂer Locking nutSharpening grass cutters and grass blades WARNING! Using an incorrect cuttingCutting equipment Cutting equipmentTrimmer head Assembling the handlebar and throttle ASSEMBLYConnecting throttle cable and stop switch wires Fitting the main body1-2mm Fitting blades and trimmer headsH L M C BA AM L Fitting the guard extensionFitting the trimmer guard and trimmer head G E F D B CStandard harness Adjusting the harness and clearing sawWARNING! When using a clearing saw it Fitting the transport guardFuel Fuel safetyWARNING! Take care when handling fuel FUEL HANDLINGWARNING! Taking the following precautions, will lessen the risk of ﬁreFuelling MixingStarting STARTING AND STOPPINGCheck before starting Starting and stoppingWARNING! When the engine is started Stoppingstarter cord around your hand WARNING! Neither the operator of the Basic safety rulesWORKING TECHNIQUES General working instructionsWARNING! Sometimes branches or Grass clearing using a grass bladeBasic working techniques Grass trimming with a trimmer headSweeping CuttingMufﬂer MAINTENANCEAdjusting the idle speed T CarburettorBevel gear Cleaning the air ﬁlterAir ﬁlter Fuel ﬁlterDaily Maintenance scheduleMaintenance maintenanceWeight TECHNICAL DATATechnical data Technical dataType Approved accessoriesEC-declarationof conformity Applies to Europe onlyPage 2,4-2,7 mm 8,5 m 28 10 cm 4,2 mClic 15 cm2,4-2,7mm 095-.1064,25 m 8,5 m 28 10 cm 4,3 m T35, T35xT45, T45x 10 m 32 10 cm 4,3 m2,7-3,3 mm C 15 cm T55xA 2,7 - 4,0 mm B 8 m / 26’12 cm Trimmy SII095-.130 7,0 m