Ryobi RY09053 manuel dutilisation General Maintenance, Cleaning the AIR Filter, See

Page 12

OPERATION

Hold the engine higher than the inlet end of the vacuum tube.

Always point vacuum tube downhill when working on a hillside.

To avoid serious injury to the operator or damage to the unit, do not pick up rocks, metal, broken glass, bottles, or other similar objects.

If the vacuum tubes should clog, stop the engine , ensure impeller blades have stopped spinning, and disconnect the spark plug wire before cleaning out the obstruction.

Remove the vacuum tubes and clear the debris from the blower fan housing. Remove the bag and clear the tube. A small rod or stick may be required to clear the entire tube length. Ensure that all debris has been cleared before reassembling the vacuum tubes.

MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

Before inspecting, cleaning, or servicing the machine, shut off engine, wait for all moving parts to stop, and disconnect spark plug wire and move it away from spark plug. Failure to follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, lubricant, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating lubricants, etc., come in con- tact with plastic parts. Chemicals can damage, weaken or destroy plastic which could result in serious personal injury.

You can often make adjustments and repairs described here. For other repairs, have the blower/vacuum serviced by an authorized service dealer.

CLEANING THE AIR FILTER

See Figure 13 - 14.

For proper performance and long life, keep air filter clean.

Remove the air filter cover by turning the dial counter- clockwise while gently pulling on the cover.

Rinse filter with clean water.

Gently squeeze filter until excess water is removed. Replace filter.

Place the air filter cover back on the unit. Turn dial clock- wise until cover is secure.

CLEANING THE EXHAUST PORT, MUFFLER AND SPARK ARRESTOR

NOTE:  Depending on the type of fuel used, the type and amount of lubricant used, and/or your operating conditions, the exhaust port, muffler, and/or spark arrestor screen may be- come blocked with carbon deposits. If you notice a power loss with your gas powered tool, you may need to remove these deposits to restore performance. We highly recom- mend that only qualified service technicians perform this service.

The spark arrestor must be cleaned or replaced every 50 hours or yearly to ensure proper performance of your prod- uct. Spark arrestors may be in different locations depending on the model purchased. Please contact your nearest service dealer for the location of the spark arrestor for your model.

WARNING:

Never run the blower without the spark arrestor in place. Failure to do so could result in a fire that could cause serious personal injury.

10 - English

Image 12
Contents Save this Manual for Future Reference ALL Versions Toutes LES Versions Todas LAS VersionesSweeper nozzle embout éventail, boquilla para barrer Proper Vacuum Operating Position Table of Contents Table DES Matières / Índice DE Contenido IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules FuelingSymbols Symbol Name ExplanationSymbol Signal Meaning Assembly Tools NeededInstalling the Vacuum BAG Installing the Vacuum TubesPacking List Assembling the Blower TubesOperation If Assistance is Required Starting this Product Operating the BlowerCruise Control Vacuum OperationMaintenance General MaintenanceCleaning the AIR Filter Cleaning the Exhaust PORT, Muffler and Spark ArrestorTroubleshooting Spark Plug ReplacementWhen storing 1 month or longer Storing the ProductWarranty Limited Warranty StatementMANUFACTURER’S Warranty Coverage This Product WAS Manufactured with a Catalyst Muffler English Règles DE Sécurité Générales Conserver CES InstructionsAVERTISSEMENT  Règles DE Sécurité Particulières Approvisionnement EN CarburantSymboles Symbole Signal SignificationSymbole NOM Explication Caractéristiques Outils NécessairesAssemblage Installation DU SAC À Débris Installation DES Tubes D’ASPIRATIONListe DES Pièces Assemblage DES Tubes DE SoufflanteUtilisation Mélange DU CarburantRemplissage DU Réservoir Carburants OxygénésUtilisation DE LA Soufflante Régulateur DE VitesseUtilisation DE L’ASPIRATEUR AVERTISSEMENT Entretien Nettoyage LE Filtre À AIREntretien Général Voir la etRemplacement DE LA Bougie DépannageBouchon DU Réservoir Avertissement Remisage LE ProduitGarantie Énoncé DE LA Garantie LimitéeResponsabilités DU Propriétaire Dans LE Cadre DE LA Garantie Besoin ’AIDE?Reglas DE Seguridad Generales Guarde Estas InstruccionesAdvertencia Reglas DE Seguridad Específicas Abastecimiento DE CombustibleSímbolos PeligroAdvertencia PrecauciónCaracterísticas Herramientas NecesariasArmado Lista DE Empaquetado Montaje DE LOS Tubos DE LA SopladoraInstalación DEL Saco DE LA Aspiradora Instalación DE LOS Tubos DE LA AspiradoraFuncionamiento Manejo DE LA Sopladora Control DE CruceroManejo DE LA Aspiradora SI Necesita Asistencia Para EL ­ARRANQUE Este ProductoMantenimiento Mantenimiento GeneralLimpieza LA Filtro DE Aire Vea la figuras 13 ySolución DE Problemas Tapa DEL Tanque DE Combustible AdvertenciaReemplazo DE LA Bujía Almacenamiento DE LA ProductoGarantía Declaración DE LA Garantía LimitadaCobertura DE LA Garantía DEL Fabricante Este Producto SE Fabricó CON UN Silenciador Catalítico Conjunto DE Silenciador CatalíticoManuel D’UTILISATION Manual DEL Operador California PropositionProposition 65 DE L’ÉTAT DE Californie California Propuesta DE LEY NÚM

RY09053 specifications

The Ryobi RY09053 is a versatile and efficient power tool designed for a variety of cutting tasks. This gas-powered string trimmer is especially well-suited for maintaining lawns and gardens, featuring a powerful 30cc 2-cycle engine that delivers reliable performance and substantial cutting power. The RY09053 is engineered for ease of use and comfort, making it an ideal choice for both novice and experienced users.

One of the standout features of the Ryobi RY09053 is its lightweight design. Weighing in at approximately 11 pounds, this trimmer provides users with a manageable and ergonomic handling experience. The curved shaft design enhances comfort during operation, allowing for extended use without undue strain or fatigue. This thoughtful design feature is particularly beneficial for homeowners and professionals who might spend considerable time trimming grass and weeds.

The RY09053 incorporates a straight, dual-line head with a bump feed mechanism, allowing for quick and efficient line advancement. This feature ensures you can keep working without interruptions, making the trimming process more efficient. The trimmer can accommodate heavy-duty line, which enhances durability and effectiveness, especially when facing tough vegetation.

Another key technological aspect of the Ryobi RY09053 is the Easy Start Technology, which ensures smooth starts and reduces the effort needed to kick-start the engine. This results in a more enjoyable user experience, as it minimizes frustration often associated with starting gas-powered tools.

Additionally, the trimmer features a three-year limited warranty, which provides peace of mind and reflects the manufacturer’s confidence in the product. It also showcases Ryobi's commitment to quality and durability in their power tools.

Overall, the Ryobi RY09053 is designed for those looking for a reliable, user-friendly string trimmer. Its combination of power, lightweight design, and technology make it a practical choice for homeowners, landscapers, and gardening enthusiasts alike. With its robust features and durability, the RY09053 stands as a strong option in the competitive market of gas-powered trimmers, helping users achieve a well-manicured yard with ease.