Ryobi RY09053 Packing List, Installing the Vacuum BAG, Installing the Vacuum Tubes

Page 9

ASSEMBLY

Inspect the product carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have care- fully inspected and satisfactorily operated the product.

If any parts are damaged or missing, please call 1-800-860-4050 for assistance.

PACKING LIST

Blower

Upper Blower Tube Sweeper Nozzle

Upper and Lower Vacuum Tubes Vacuum Tube Screws (2) Vacuum Bag

Vacuum Bag Adaptor

2-Cycle Engine Lubricant Operator’s Manual

NOTE: Read and remove all hang tags and store with your Operator’s Manual.

INSTALLING THE VACUUM BAG

See Figures 4 - 5.

Remove the nozzle and upper blower tube from the blower by twisting and removing from blower housing outlet.

Unzip the vacuum bag and place the vacuum bag adaptor inside as shown. Push the vacuum bag adaptor through the opening opposite the zipper. The wider end of the adaptor will remain on the inside of the vacuum bag when installed properly.

Align the raised slots on the vacuum bag adaptor with the raised locking tabs on the blower housing outlet; push the vacuum bag adaptor onto the housing. Twist to lock into place.

Rotate the vacuum bag until the shoulder strap is upright.

Make sure the vacuum bag is zipped and closed before starting the unit.

INSTALLING THE VACUUM TUBES

See Figures 6 - 7.

WARNING: WARNING:

If any parts are damaged or missing do not operate this product until the parts are replaced. Use of the product with damaged or missing parts could result in possible serious personal injury.

Contact with rotating impeller blades could result in seri- ous personal injury. Always stop the engine and ensure impeller blades have stopped rotating before opening the vacuum door or installing/changing tubes. Do not put hands or any other object into the vacuum tubes while they are installed on the unit.

WARNING:

Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.

ASSEMBLING THE BLOWER TUBES

See Figures 2 - 3.

Align raised tabs on blower housing outlet to the slots on upper tube; slide together and tighten securely by twisting. Check tightness after initial use and retighten if needed.

Attach sweeper nozzle to upper blower tube by aligning raised tabs on upper blower tube; slide together and tighten securely by twisting. Check tightness after initial use and retighten if needed.

To remove the tubes, rotate the tubes to unlock them and remove from the blower housing outlet.

To install the vacuum tubes:

Secure the upper and lower vacuum tubes together by aligning the raised locking tabs with the raised slots.

Tap tube assembly on ground until the screw holes in lower tube are in the raised slot of the upper tube. Secure with supplied screws.

Depress door tab using a flathead screwdriver and open vacuum inlet door.

Align screw mounts on vacuum opening with screws on vacuum tube assembly.

Turning clockwise, tighten screws on upper vacuum tube to secure to blower housing.

To remove the vacuum tubes:

Loosen screws of the upper vacuum tube by turning counterclockwise.

Remove the vacuum tube assembly from the blower housing.

Close the vacuum inlet cover door securely.

7 - English

Page 8 Page 10
Image 9
Page 8 Page 10
Contents ALL Versions Toutes LES Versions Todas LAS Versiones Save this Manual for Future ReferenceSweeper nozzle embout éventail, boquilla para barrer Proper Vacuum Operating Position Introduction Table of Contents Table DES Matières / Índice DE ContenidoRead ALL Instructions General Safety RulesFueling Specific Safety RulesSymbols Symbol Name ExplanationSymbol Signal Meaning Tools Needed AssemblyInstalling the Vacuum Tubes Installing the Vacuum BAGPacking List Assembling the Blower TubesOperation Operating the Blower If Assistance is Required Starting this ProductCruise Control Vacuum OperationGeneral Maintenance MaintenanceCleaning the AIR Filter Cleaning the Exhaust PORT, Muffler and Spark ArrestorSpark Plug Replacement TroubleshootingWhen storing 1 month or longer Storing the ProductLimited Warranty Statement WarrantyMANUFACTURER’S Warranty Coverage This Product WAS Manufactured with a Catalyst Muffler English Règles DE Sécurité Générales Conserver CES InstructionsAVERTISSEMENT  Approvisionnement EN Carburant Règles DE Sécurité ParticulièresSymboles Symbole Signal SignificationSymbole NOM Explication Caractéristiques Outils NécessairesAssemblage Installation DES Tubes D’ASPIRATION Installation DU SAC À DébrisListe DES Pièces Assemblage DES Tubes DE SoufflanteMélange DU Carburant UtilisationRemplissage DU Réservoir Carburants OxygénésRégulateur DE Vitesse Utilisation DE LA SoufflanteUtilisation DE L’ASPIRATEUR AVERTISSEMENT Nettoyage LE Filtre À AIR EntretienEntretien Général Voir la etDépannage Remplacement DE LA BougieBouchon DU Réservoir Avertissement Remisage LE ProduitÉnoncé DE LA Garantie Limitée GarantieResponsabilités DU Propriétaire Dans LE Cadre DE LA Garantie ’AIDE? BesoinReglas DE Seguridad Generales Guarde Estas InstruccionesAdvertencia Abastecimiento DE Combustible Reglas DE Seguridad EspecíficasPeligro SímbolosAdvertencia PrecauciónCaracterísticas Herramientas NecesariasArmado Montaje DE LOS Tubos DE LA Sopladora Lista DE EmpaquetadoInstalación DEL Saco DE LA Aspiradora Instalación DE LOS Tubos DE LA AspiradoraFuncionamiento Control DE Crucero Manejo DE LA SopladoraManejo DE LA Aspiradora SI Necesita Asistencia Para EL ­ARRANQUE Este ProductoMantenimiento General MantenimientoLimpieza LA Filtro DE Aire Vea la figuras 13 yTapa DEL Tanque DE Combustible Advertencia Solución DE ProblemasReemplazo DE LA Bujía Almacenamiento DE LA ProductoDeclaración DE LA Garantía Limitada GarantíaCobertura DE LA Garantía DEL Fabricante Conjunto DE Silenciador Catalítico Este Producto SE Fabricó CON UN Silenciador CatalíticoCalifornia Proposition Manuel D’UTILISATION Manual DEL OperadorProposition 65 DE L’ÉTAT DE Californie California Propuesta DE LEY NÚM

RY09053 specifications

The Ryobi RY09053 is a versatile and efficient power tool designed for a variety of cutting tasks. This gas-powered string trimmer is especially well-suited for maintaining lawns and gardens, featuring a powerful 30cc 2-cycle engine that delivers reliable performance and substantial cutting power. The RY09053 is engineered for ease of use and comfort, making it an ideal choice for both novice and experienced users.

One of the standout features of the Ryobi RY09053 is its lightweight design. Weighing in at approximately 11 pounds, this trimmer provides users with a manageable and ergonomic handling experience. The curved shaft design enhances comfort during operation, allowing for extended use without undue strain or fatigue. This thoughtful design feature is particularly beneficial for homeowners and professionals who might spend considerable time trimming grass and weeds.

The RY09053 incorporates a straight, dual-line head with a bump feed mechanism, allowing for quick and efficient line advancement. This feature ensures you can keep working without interruptions, making the trimming process more efficient. The trimmer can accommodate heavy-duty line, which enhances durability and effectiveness, especially when facing tough vegetation.

Another key technological aspect of the Ryobi RY09053 is the Easy Start Technology, which ensures smooth starts and reduces the effort needed to kick-start the engine. This results in a more enjoyable user experience, as it minimizes frustration often associated with starting gas-powered tools.

Additionally, the trimmer features a three-year limited warranty, which provides peace of mind and reflects the manufacturer’s confidence in the product. It also showcases Ryobi's commitment to quality and durability in their power tools.

Overall, the Ryobi RY09053 is designed for those looking for a reliable, user-friendly string trimmer. Its combination of power, lightweight design, and technology make it a practical choice for homeowners, landscapers, and gardening enthusiasts alike. With its robust features and durability, the RY09053 stands as a strong option in the competitive market of gas-powered trimmers, helping users achieve a well-manicured yard with ease.
Top Page Image Contents