Uniden BC75XLT owner manual Charging the Ni-MH Batteries through USB Connection

Page 25

1.Make sure the power is turned off.

2.Slide the battery compartment cover off.

3.Use a pointed object such as a ballpoint pen to set the battery selection switch inside the compartment to Ni-MH.

4.Install two batteries in the compartment as indicated by the polarity symbols (+ and -) marked inside the battery compartment.

5.Replace the battery compartment cover.

Note: To prevent damage to Ni-MH batteries, never charge them in an area where the temperature is above 113°F (45°C) or below 40°F (4°C).

Charging the Ni-MH Batteries through USB Connection

The scanner has a built-in circuit to charge the Ni-MH batteries when a USB cable connects it to a computer (NOT to a USB hub) or to an AC or DC adapter that provides USB charging power. Verify that the battery selection switch is set to Ni-MHand that only Ni-MH rechargeable batteries are inserted in the scanner before connecting it to your computer.

Caution: Never attempt to charge non-rechargeable batteries or install non-rechargeable batteries when the battery selection switch is set to Ni-MH..

1.Be sure the scanner is turned off. It will recharge only if it is turned off, even with the USB cable connecting it to a computer.

2.Connect the included USB cable to the scanner’s USB port.

25

Image 25

Contents BC75XLT Owner’s Precautions Page Contents Page Unlock Priority Delay Keylock Backlight PC Programming FCC Wants You to Know Scanning Legally Page Introduction BC75XLT Feature HighlightsPage Page Frequency Range USA Band Plan Frequency Range MHz Step Mode kHz TransmissionStep Mode Transmission MHz KHz Canada Band Plan What is Searching? What is Scanning?Scanning basics Simplex Operation Conventional ScanningWhat Are Banks? Service Search BandsRepeater Operation Channel Storage BanksCustom Search Ranges Where To Learn MoreWhat’s In The Box? SetupConnect the Antenna Setting Up the ScannerAdjusting the Belt Clip Connecting an Optional Extension SpeakerConnect an Optional Earphone/Headphone Installing Rechargeable 2300mAh Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries through USB Connection LCD Message Batt Meaning Scanner Type Cond Turn On The Scanner Low Battery AlertAdjusting for Interference Adjust SquelchHardware Description BC75XLT Controls and DisplayKeypad Key/Icon Primary Function Key HoldSrch/Svc Key/Icon Primary Function Key ScanPri DlyPgm/E Key/Icon Primary Function Key PSrcClr FuncLine Display Description LCD DisplayDisplay Description To Close Call modeSearch Hold modes SearchING OperationQuick Search Custom Search Service Search Storing Frequencies Erasing a Stored Frequency ScanningPress Func + Pgm Enabling/Disabling Channel BanksManually Select a Channel Scan the Stored ChannelsPage Close Call RF Capture Close Call Operation ModeBand Range MHz To turn a Close Call Low High Using Close Call ModeLocking Out Channels and Frequencies Permanent Lock Out Temporary Lock OutUnlock Priority You cannot lock out frequencies during WX service searchDelay Keylock Mode Delay SpecificationPC Programming BacklightProblem Possible Cause Suggestion TroubleshootingProblem Possible Cause Suggestion Problem Possible Cause Suggestion Resetting the Scanner Care and MaintenanceGeneral Use LocationRepairs CleaningBirdies Page Specifications Seconds Warrantor Uniden America Corporation Uniden One-Year Limited WarrantyProcedure for Obtaining Performance of Warranty