Uniden BC75XLT owner manual LCD Message Batt Meaning Scanner Type Cond

Page 26

3.Connect the other end of the USB cable to the computer’s USB port or to an AC or DC adapter that provides USB charging power.

Note: If you connect to a computer’s USB port, the PC will prompt you for the drivers for your scanner. To download and install these drivers, go to http://info.uniden.com/UnidenMan4/ BC75XLT.

4.The scanner displays CHArg and the low battery icon while it charges the batteries. The screen goes blank after the scanner is completely charged.

Different status messages may display, depending on the battery type and scanner status:

LCD Message	Batt..	Meaning	Scanner
	Type		Cond..

CHArg	Ni-MH	Scanner is charging.	Off

None	Ni-MH	Unit is charged.	Off

None	Ni-MH	Scanner is not	Off
		charging (Battery
		selection switch is
		set to Alk.)

Err CHArg	Ni-MH	Batteries cannot	Off
		be charged (dead
		battery).

ILEgAL	Ni-MH	USB external power	Off
		is out of range.

If the batteries are good, the scanner charges the batteries. and it operates normally. If the scanner cannot immediately

26

Image 26

Contents BC75XLT Owner’s Precautions Page Contents Page Unlock Priority Delay Keylock Backlight PC Programming FCC Wants You to Know Scanning Legally Page BC75XLT Feature Highlights IntroductionPage Page Frequency Range Frequency Range MHz Step Mode kHz Transmission USA Band PlanStep Mode Transmission MHz KHz Canada Band Plan Scanning basics What is Scanning?What is Searching? Conventional Scanning Simplex OperationRepeater Operation Service Search BandsWhat Are Banks? Channel Storage BanksWhere To Learn More Custom Search RangesSetup What’s In The Box?Setting Up the Scanner Connect the AntennaConnect an Optional Earphone/Headphone Connecting an Optional Extension SpeakerAdjusting the Belt Clip Installing Non-Rechargeable Batteries Installing Rechargeable 2300mAh Ni-MH BatteriesCharging the Ni-MH Batteries through USB Connection LCD Message Batt Meaning Scanner Type Cond Low Battery Alert Turn On The ScannerAdjust Squelch Adjusting for InterferenceKeypad BC75XLT Controls and DisplayHardware Description Key/Icon Primary Function Key HoldPri Key/Icon Primary Function Key ScanSrch/Svc DlyClr Key/Icon Primary Function Key PSrcPgm/E FuncLCD Display Line Display DescriptionTo Close Call mode Display DescriptionSearch Hold modes Quick Search OperationSearchING Custom Search Service Search Storing Frequencies Press Func + Pgm ScanningErasing a Stored Frequency Enabling/Disabling Channel BanksScan the Stored Channels Manually Select a ChannelPage Close Call Operation Mode Close Call RF CaptureUsing Close Call Mode Band Range MHz To turn a Close Call Low HighLocking Out Channels and Frequencies Unlock Temporary Lock OutPermanent Lock Out You cannot lock out frequencies during WX service search PriorityDelay Mode Delay Specification KeylockBacklight PC ProgrammingTroubleshooting Problem Possible Cause SuggestionProblem Possible Cause Suggestion Problem Possible Cause Suggestion General Use Care and MaintenanceResetting the Scanner LocationBirdies CleaningRepairs Page Specifications Seconds One-Year Limited Warranty Warrantor Uniden America Corporation UnidenProcedure for Obtaining Performance of Warranty