•Close Call DND. Close Call Do Not Disturb only checks for close calls if it is not stopped on a transmission. The 
icon displays.
•Close Call Priority. The scanner checks for close calls regardless of whether it is stopped on a transmission. The 
icon displays.
•Close Call Off. The scanner does not check for close calls. No icon displays.
Pressing Fnc + 
cycles through the Close Call functions in this order: Close Call Off/Close Call DND/ Close Call Priority.
To turn on Close Call mode, press Func + 
once except in WX Search, Band Select, or Program mode.
Notes:
•Set the squelch tight (where only strong signals are received) while using the Close Call feature.
•To continue scanning normally while the Close Call feature is working, simply press Scan.
When the scanner finds a frequency, Found displays; it does not display the frequency. Press any key to confirm the displayed frequency. Press Scan to resume scanning. Every 2 seconds, the scanner checks for frequencies in the Close Call band you specified (see page 43).
Locking Out Channels and Frequencies
You can skip any channel or up to 200 specified frequencies during Search mode (100 permanent and 100 temporary). This lets you avoid unwanted frequencies (Search/Close Call modes), channels that have a continuous transmission (such as a weather channel), or have static and interference.
44