Uniden BC75XLT owner manual Scanning, Erasing a Stored Frequency, Press Func + Pgm

Page 39

If you entered a frequency that has already been entered elsewhere, the scanner sounds an error tone and displays the channel that was duplicated. If you entered the frequency by mistake, press ..Clr twice to clear the frequency and enter a different one. To enter the frequency anyway, press E to accept.

Erasing a Stored Frequency

1.Find the frequency you want to erase. Press Hold.

2.Press Func + Pgm.

3.Press 0 and then press E.

4.The displayed frequency changes to all 0s.

Scanning

When you store frequencies into channels, those channels are grouped into banks. Each bank contains 30 channels. You can store service channels and non-service channels in the same bank. For example, you can store a city’s fire, police, marine, etc, together with utilities and other businesses. There is no frequency range restriction per bank.

While you are scanning frequencies stored in the banks, the word SCAN scrolls across the display. When it finds a transmission, that frequency displays.

Enabling/Disabling Channel Banks

You can enable and disable each channel bank. When you disable a bank, the scanner does not scan any of the 30 channels in that bank.

In Scan modes, press the number key that corresponds to the bank you want to disable or enable. That bank number

39

Image 39

Contents BC75XLT Owner’s Precautions Page Contents Page Unlock Priority Delay Keylock Backlight PC Programming FCC Wants You to Know Scanning Legally Page Introduction BC75XLT Feature HighlightsPage Page Frequency Range USA Band Plan Frequency Range MHz Step Mode kHz TransmissionStep Mode Transmission MHz KHz Canada Band Plan What is Scanning? What is Searching?Scanning basics Simplex Operation Conventional ScanningChannel Storage Banks Service Search BandsWhat Are Banks? Repeater OperationCustom Search Ranges Where To Learn MoreWhat’s In The Box? SetupConnect the Antenna Setting Up the ScannerConnecting an Optional Extension Speaker Adjusting the Belt ClipConnect an Optional Earphone/Headphone Installing Rechargeable 2300mAh Ni-MH Batteries Installing Non-Rechargeable BatteriesCharging the Ni-MH Batteries through USB Connection LCD Message Batt Meaning Scanner Type Cond Turn On The Scanner Low Battery AlertAdjusting for Interference Adjust SquelchKey/Icon Primary Function Key Hold BC75XLT Controls and DisplayHardware Description KeypadDly Key/Icon Primary Function Key ScanSrch/Svc PriFunc Key/Icon Primary Function Key PSrcPgm/E ClrLine Display Description LCD DisplayDisplay Description To Close Call modeSearch Hold modes Operation SearchINGQuick Search Custom Search Service Search Storing Frequencies Enabling/Disabling Channel Banks ScanningErasing a Stored Frequency Press Func + PgmManually Select a Channel Scan the Stored ChannelsPage Close Call RF Capture Close Call Operation ModeBand Range MHz To turn a Close Call Low High Using Close Call ModeLocking Out Channels and Frequencies Temporary Lock Out Permanent Lock OutUnlock Priority You cannot lock out frequencies during WX service searchDelay Keylock Mode Delay SpecificationPC Programming BacklightProblem Possible Cause Suggestion TroubleshootingProblem Possible Cause Suggestion Problem Possible Cause Suggestion Location Care and MaintenanceResetting the Scanner General UseCleaning RepairsBirdies Page Specifications Seconds Warrantor Uniden America Corporation Uniden One-Year Limited WarrantyProcedure for Obtaining Performance of Warranty