Poulan 968999507, 968999516 manual Personal Safety Equipment, Slope Operation, Safety Instructions

Page 11
Personal Safety Equipment

SAFETY INSTRUCTIONS

Personal Safety Equipment

WARNING!

When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment.

Make sure that you have first aid equipment close at hand when using the machine.

• Never use the machine when barefoot. Always wear protective shoes or boots, preferably with steel toecaps.

Always wear approved protective glasses

or a full visor when assembling or driving.

Always wear gloves when handling the

blades.

Never wear loose clothing that can get caught

 

 

in moving parts.

 

Use ear protectors to avoid damage to

 

 

hearing.

8011-670

 

 

 

 

Personal protective equipment

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

Mow up and down slopes (10 degrees maxium), not across.

Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Choose a low ground speed so that you will not have to stop while on the slope.

Do not mow on wet grass. Tires may lose traction.

Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause the machine to roll over.

6003-004

Mow up and down, not side-to-side

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. And do not drive across any slopes.

English-9

Image 11
Contents Operator´s manual EnglishPro 925 ZX Pro 950 ZX 968999516 968999507Page OPERATOR’S MANUAL RIDER Z SERIES ContentsEnglish-2 General INTRODUCTIONIntroduction CongratulationsManufacturing Number Good ServiceSymbols and Decals SYMBOLS AND DECALSRead General Operation SAFETY INSTRUCTIONSSafety Instructions English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance •Use protective goggles IMPORTANT INFORMATION TransportCustomer responsibilities Control Locations CONTROLSControls Tracking 1. Motion Control Levers3. Fuses 2. Seat adjustment knobs4. By pass linkages 5. Refueling 6. Blade switch9. Throttle Control 7. Ignition Switch8. Choke Control 11. Parking Brake 10. Hour Meter12. Cutting height pedal AccessoriesTraining OPERATIONOperation Starting the Engine Before Starting6.Move the throttle to the middle position IMPORTANT INFORMATION To start an engine with a weak battery Running Operating on hills Mowing patterns Mowing TipsStopping the Engine Moving by Hand Maintenance Schedule MAINTENANCEMaintenance Check/adjust throttle cable Battery Ignition System Checking the Safety System and tighten the clamping screw Checking and Adjusting the Throttle CableChecking and Adjusting the Choke Cable Checking the Engines Cooling Air IntakeReplacing the Air Filter Checking the Parking Brake Replacing the Fuel FilterChecking Tire Pressures Deck belt Checking the V-belts1. Clutch pulley Deck belt installationBelt installation EZT beltChecking the Blades Adjusting the Mower Deck To level deck Side-to-sideadjustmentFront-to-backadjustment IMPORTANT INFORMATION To adjust anti-scalprollers Use protective glasses when cleaning and washing Cleaning and WashingCaster Wheels HardwareLubrication Schedule LUBRICATIONLubrication Lubricating the Cables IMPORTANT INFORMATION 2. Changing the Oil Filter Checking the oil levelTransmission Trouble Shooting Guide TROUBLE SHOOTING GUIDEWrong fuel type Uneven mowing results Winter Storage ServiceSTORAGE StorageWiring diagram WIRING DIAGRAMSTechnical Data TECHNICAL DATAProductivity EquipmentTorque Specifications Metric Standard Hardware TORQUE SPECIFICATIONS HEX HEAD CAP SCREWSU.S. Standard Hardware USA requirements CONFORMITY CERTIFICATESConformity Certificates Delivery Service SERVICE JOURNALService Journal 1. Change engine oil After the First 5-8Hours6.Clean the air cleaner’s pre-filterfoam 25-HourService4.Check battery with cables 5.Check/clean the engine’s cooling air intake3.Change the engine oil 50-HourService1.Perform the 25-hourservice 5.Check/adjust the parking brake3.Change the engine oil filter 100-HourService2.Perform the 50-hourservice 4.Clean/replace the spark plug300-HourService At Least Once Each Year English-73 English-74 English-75 Page Page 113920Rir07/11/06