Partner Tech P145107HP instruction manual Reverse Operation System ROS, Rückwärtsgangsystem ROS

Page 41

5

ROS "ON"

ROS "AN"

ROS "ON"

ROS "ON"

ROS "ON"

ROS "ON"

Reverse Operation System (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING! Backing up with the attachment clutch engaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do

not mow in reverse unless absolutely necessary.

USING THE ROS

With engine running, turn ignition key counterclockwise to ROS "ON" position.

Look down and behind before backing.

Slowly depress reverse drive pedal to begin movement.

When use of the ROS is no longer needed, turn the igni- tion key clockwise to engine "ON" position.

Rückwärtsgangsystem (ROS)

Ihr Traktor ist mit einem Rückwärtsgangsystem ausgestattet (ROS). Jeder Versuch des Fahrers, mit eingehakter Anhän- gerkupplung im Rückwärtsgang zu fahren, wird den Motor abschalten, außer der Zündschlüssel ist in der Stellung auf ROS "AN".

WARNUNG! Vom Reversieren mit eingehakter Anhängerk- upplung beim Mähen wird dringend abgeraten. Sie sollten ROS "AN" zum Reversieren mit eingehakter Anhängerkup- plung nur dann einschalten, wenn Sie entscheiden, dass die Maschine mit eingehängtem Anhänger zurückgesetzt werden muss. Mähen Sie nicht im Rückwärtsgang, wenn es nicht absolut notwendig ist.

VERWENDUNG DES ROS

Bei laufendem Motor drehen Sie den Zündschlüssel gegen den Uhrzeigersinn auf ROS "AN".

Schauen Sie vor dem Reversieren nach unten und nach hinten.

Drücken Sie das Pedal für den Rückwärtsgang langsam nieder, um mit der Bewegung zu beginnen.

Wenn die Verwendung von ROS nicht mehr gebraucht wird, drehen Sie den Zündschlüssel im Uhrzeigersinn auf Stellung Motor "AN".

 

Engine "ON" (Normal Operating)

 

Motor "AN" (Normalbetrieb)

 

Moteur "ON" (Fonctionnement normal)

 

Motor "ON" (Funcionamiento Normal)

 

Motore "ON" (Funzionamento normale)

0282

Motor "ON" (normaal functioneren)

8

 

Sécurité Marche Arrière (ROS)

Votre tracteur est équipé d’un dispositif de sécurité de fonction- nement en marche arrière (ROS). Dès que l’opérateur essaie d’enclencher la marche arrière en actionnant l’embrayage de l’équipement , le moteur s’arrête si la clé de contact n’est pas en position ROS "ON" (sécurité marche arrière).

ATTENTION! Il est fortement déconseillé de faire marche arrière avec l’embrayage de l’équipement enclenché. Mettre la sécurité ROS en position "ON" pour faire marche arrière avec l’embrayage de l’équipement enclenché uniquement lorsque l’opérateur décide que cette opération est nécessaire pour repositionner le tracteur avec l’équipement enclenché.

N’utiliser la faucheuse en marche arrière que si c’est absolument nécessaire.

UTILISATION DU DISPOSITIF DE SECURITE ROS

Laisser tourner le moteur et tourner la clé de contact vers la gauche sur ROS "Marche" (ON).

Regarder en bas et derrière avant de faire marche ar- rière.

Appuyer doucement sur la pédale de marche arrière pour commencer le mouvement

Quand les manœuvres avec le dispositif ROS sont terminées, tourner la clé de contact vers la droite sur la position Moteur "Marche" (ON).

Sistema de Funcionamiento Atrás (ROS)

Tu tractor está equipado con un Sistema de Funcionamiento Atrás (ROS). Cualquier tentativa del operador de viajar marcha atrás con el embrague puesto apagará el motor a menos que la llave de ignición se ponga en la posición ROS "ON".

¡ATENCIÓN! Ir marcha atrás con el embrague puesto mien- tras se corta, es muy desaconsejable. Poniendo el ROS en posición "ON", para permitir el funcionamiento atrás con el embrague puesto, se tiene que hacer solo cuando el operador lo considere necesario para reposicionar la máquina con el dispositivo embragado. No corte marcha atrás a menos que no sea absolutamente necesario.

USAR EL ROS

Con el motor en marcha, girar la llave de ignición en el sentido inverso al de las agujas del reloj hasta la posición ROS "ON".

Mirar abajo y detrás antes de ir hacia atrás.

Bajar lentamente el pedal de marcha atrás para empezar el movimiento.

Cuando el uso del ROS ya no es necesario, girar la llave de ignición en el sentido de las agujas del reloj en la

posición Motor "ON".

41

Image 41
Contents Manuale di istruzioni Manuel d’instructionsAnleitungshandbuch Manual de las instruccionesPage Training Safety RulesII. Preparation III. OperationIV. Maintenance and Storage Schulung SicherheitsvorschriftenIII. Betrieb II. VorbereitungIV. Wartung UND Lagerung Précautions D’UTILISATION Règles de SécuritéII. Préparation III. UtilisationIV. Entretien ET Entreposage Instrucción Reglas De SeguridadII. Preparación III. OperaciónIV. Mantenimiento Y Almacenamiento Addestramento ALL’USO Norme AntinfortunisticheII. Preparazione III. FunzionamentoIV. Manutenzione E Periodi DI INATTIVITA’ Training VeiligheidsregelsII. Voorbereiding III. BedieningP145107HP IV. Onderhoud EN Opslag542 43ª 2Ã#+7­243&!24 #.%,,&!24 #4ª #%ª!22µ2% 34/.ª.%542% ª3,/0%3ª-/2%ª4!.ª 42%3!.,%45.ª,%3% $2%#46%ª&/2ª3!&%49 Explosive Gase AUSSPÜLEN. Sofort Züglich MIT WasserÄrztliche Hilfe AufsuchenVolante DE Dirección Volant DE DirectionSteering Wheel LenkradAdjust Seat Install SeatSitz Montieren Einstellen DES SitzesInstallatie VAN DE Stoel Installazione DEL SedileInstalación DEL Asiento Ajustar EL AsientoInstallazione Della Batteria Install Battery Einbau DER BatterieAccu Installeren Mise EN Place DE LA Batterie02604 Installatie mulcherplaat indien hiermee uitgerust Install Mulcher Plate if equippedMontage der Zerkleinerungsplatte sofern vorhan- den Mise en place de la plateforme de la tondeuse si équipéAnordnung der Bedienungseinrichtungen Positioning of controlsUbicación de los mandos Emplacement des commandesComandi De plaats van de bedieningsorganenGashebel Throttle controlAcelerador AcceleratoreBremspedal Brake PedalPédale de frein Pedal del frenoAcoplamiento y desacoplamiento del equipo de corte Commande dembrayage et de débrayage du carter de coupeConnection/disconnection of the cutting unit Inserimento/disinserimento del dispositivo di taglioROS on Feststellbremse Parking brakeFrein de stationnement Freno de estacionamientoKaltstartregler Choke controlStarter EstranguladorReposición de combustible Filling upTanken Plein de carburantÖlstand Oil levelNiveau d’huile Nivel de aceiteAnlassen des Motors Driving . Betrieb . Conduite . Conducción Guida . RijdenPage Nota HinweisEntlüften DES Getriebes Purge TransmissionPurge DE LA Transmission Your tractor is now ready for normal operationSpurgo Della Trasmissione Purgar LA TransmisiónTransmissie Ontluchten Su tractor esta ahora dispuesto para la operación normalNota HinweisRemarque Vorwärts- und Rückwärtsbewegung To Move Forward and BackwardPour avancer et pour reculer Moverse hacia adelante y hacia atrásRückwärtsgangsystem ROS Reverse Operation System ROSSécurité Marche Arrière ROS Sistema de Funcionamiento Atrás ROSSysteem voor achteruit ROS Sistema per operazioni in retromarcia ROSCutting tips Ratschläge zum RasenmähenConsejos para el corte Conseils pour la tonteConsigli per il taglio dell’erba MaaitipsAdvertencia Warnung AdvertenciaPericolo WaarschuwingAdvertencia Motorhaube Engine hoodCapot moteur Cubierta del motorWartung MaintenanceEntretien Warnung QuetschkantenOnderhoud MantenimientoManutenzione To Change OIL Para Cambiar EL AceitePER Cambiare L’OLIO Ölwechsel DurchführenCheck brake operation Clean air screen Fill in dates as you complete regular service EveryClean engine cooling fins Clean battery and terminals Check mufflerVérification des freins Nettoyage de la grille daération Sans filtre à huilePré-filtre Filtre à air50 ore Vul telkens u service uitvoert, de datum Indien Om de NodigControllo freni Pulizia schermo aria Pulizia raffreddamento motoreFahrer-Anwesenheitssystem und Rückwärts- gangsystem ROS Operator Presence System and Reverse Opera- tion System ROSControl Sistema Presencia Operador Lames BladesMesserbalken Messen CuchillasLame Entfernen Des Mähers To Remove MowerDie Feder Q des Kupplungskabels vom Zwischenhebel Abnehmen Den Mäher von rechts unter dem Traktor hervorziehenPour Démonter La Faucheuse Assembly of the cutting unitPara Quitar El Cortacésped Per Rimuovere La FalciatriceAustauschen des Antriebsriemens des Mähers To Replace Mower Drive BeltSustituir la correa de transmisión cortacésped Pour remplacer la courroie de transmissionSostituzione della cinghia di trasmissione del rasaerba De aandrijfriem van de maaiunit vervangenTo Level Mower Visual SIDE-TO-SIDE AdjustmentPrecision SIDE-TO-SIDE Adjustment Visuelle Justierung AN Beiden Seiten Ausnivellieren des MähersGenaue justierung an beiden seiten Justierung in LängsrichtungRéglage Visuel Bilatéral Pour mettre la tondeuse à niveauRéglage Bilatéral DE Précision Réglage D’AVANT EN ArrièreAjuste DE LA Parte Delantera a LA Trasera Nivelar el cortacéspedAjuste Visual DE Lado a Lado Regolazione Visiva LATO-LATO Livellamento del rasaerbaRegolazione DI Precisione LATO-LATO Regolazione DAVANTI-DIETROBeide kanten op het oog uitlijnen De maaiunit nivellerenPRECISIE-AFSTELLING BAN Beide Kanten BAN DE Maaiunit Afstelling BOOR-EN AchterzijdeÜberprüfen der Bremse To Check BrakePour vérifier le frein Controlar el FrenoRemplacement de la courroie dentraînement Replacement of drive beltAuswechsein des Treibriemens Cambio de correa propulsoraTRANSACHSEN-KÜHLUNG Transaxle CoolingRefroidissement DE LA Transmission Enfriamiento DEL TransejeWASCHANLAGEN-ÖFFNUNG DER Abdeckung Deck Washout PortBoca DE Lavado DE LA Plataforma Port DE Lavage DU ChâssisDekreinigingspoort Apertura DI Lavaggio DEL PiattoTroubleshooting 7. Störungssuche Recherche des pannes . Búsqueda de averías Ricerca guasti . Het localiseren van fouten Storage . Aufbewahrung . Remisage . Conservación ServiceEntretien et réparations ServicioServizio Rismessaggio . StallenPage 09.09.10 AP

P145107HP specifications

The Partner Tech P145107HP is a versatile and robust point-of-sale (POS) terminal designed to enhance transactional efficiency and customer interactions in retail environments, hospitality, and other service sectors. This sophisticated device is equipped with cutting-edge technologies and features that empower businesses to streamline their operations while providing exceptional service.

One of the standout features of the P145107HP is its high-resolution touchscreen display, which offers an intuitive user interface. The 15-inch screen, with its vivid colors and sharp image quality, ensures that employees can easily navigate through applications and access vital information quickly. This user-friendly interface minimizes training time and enhances overall productivity.

In terms of performance, the P145107HP comes with a powerful processor and ample memory, enabling it to handle multiple applications simultaneously without lagging. This ensures that transactions are processed swiftly, reducing wait times for customers and improving the overall shopping experience. Furthermore, the device supports a variety of operating systems, including Windows, Android, and Linux, allowing businesses to choose the platform that best suits their needs.

The P145107HP is designed with connectivity in mind. It comes equipped with multiple USB ports, Ethernet, and optional Wi-Fi capabilities, which facilitate seamless integration with various peripherals such as barcode scanners, receipt printers, and cash drawers. This adaptability ensures that businesses can customize their POS setup to suit their workflow and operational requirements.

Security is a top priority for any POS system, and the Partner Tech P145107HP excels in this area as well. The device features encrypted card readers that comply with industry standards, ensuring that sensitive payment information is protected during transactions. This secure processing builds customer confidence and reduces the risk of data breaches.

Durability is another key characteristic of the P145107HP. Designed for heavy-duty use, the terminal is built to withstand the rigors of everyday transactions in high-traffic environments. The robust construction and reliable performance make it a long-lasting investment for businesses.

In conclusion, the Partner Tech P145107HP is a reliable and highly functional POS terminal that offers an array of features and technologies designed to improve efficiency, enhance customer experiences, and ensure secure transactions. Its high-resolution touchscreen, powerful performance, robust connectivity options, and durability make it an ideal choice for various business applications. Whether in retail or hospitality, the P145107HP stands ready to meet the demands of modern commerce.