Remington RPS2N1: 106821A owner manual Electric Chain SAW, Unpacking, Pole SAW Names and Terms

FIGURES/FIGURAS/FIGURES	2nd Cut - Pruning Cut (to avoid pinching)/2do corte:
	Poda preliminar (para evitar la compresión durante
Continued/Continœa/Ë suivre	la poda final)/2ème entaille - entaille d’élagage pour
	éviter le pincement

Chain Saw Power Cord/Cable Flexible de	4th Cut - Final Stub Cut / 4to corte:
Alimentación de la Sierra de Cadena/
Cordon d’alimentation de la tronçonneuse	Poda final/4ème		entaille - entaille
	finale du reste de		la branche
Extension Cord/Cable					6"
					(15 cm)
Flexible de Extensión/
Câble de rallonge							2" to 4"
							(5 a 10 cm)
				1st		Cut - Pruning Undercut (to avoid
Figure 5 - Tying Extension Cord and Power Cord						splintering)/1er corte: Corte inferior
				(para evitar la formación de
in Knot
				astillas)/1ère entaille - entaille par le
Figura 5 - Amarre del Cable de Extensi—n con el				dessous pour éviter les éclats
Cable de Alimentaci—n usando un Nudo		3rd Cut - Stub Undercut (to avoid
Figure 5 - Comment attacher ensemble le c‰ble
		splintering)/3er corte: Corte inferior (para
de rallonge et le cordon dÕalimentation de la scie
		evitar la formación de astillas)/3ème
		entaille - entaille par le dessous du reste
		de la branche pour éviter les éclats

Figure 9 - Cutting A Limb

Figura 9 - Poda de una rama

Figure 9 - Coupe dÕune branche

UNLOCK/LOCK/

DESBLOQUEADO/ BLOQUEADO/

DÉVERROUILLÉE VERROUILLÉE

Figure 6 - Extending Telescopic Pole

Figura 6 - Extendiendo la PŽrtiga Telesc—pica Figure 6 - Extension de la perche tŽlescopique

Grip Area/Área de Agarre/Prise

Figure 7 - Designated Grip Areas Figura 7 - çreas de Agarre Designadas Figure 7 - Parties dŽsignŽes pour la prise

Trigger Switch Lock-out/Bloqueo del Interruptor de Gatillo/Verrouillage d’interdiction de la gâchette

Trigger Switch/Interruptor de

Gatillo/Gâchette

Figure 8 - Pole Saw Handle with Trigger Switch Lock-out

Figura 8 - Mango de la Sierra de PŽrtiga con el Bloqueo del Interruptor de Gatillo

Figure 8 - PoignŽe de la scie ˆ perche avec verrouillage dÕinterdiction de la g‰chette

¨

ELECTRIC CHAIN SAW

MODEL RPS2N1: 106821A

IMPORTANT: Read and understand this manual before assembling or operating this chain saw. Improper use of saw can cause severe injury. Keep this manual for future reference.

UNPACKING

1.Remove all items from carton.

2.Check all items for any shipping damage. If you Þnd any damage or if any parts are missing, promptly inform dealer where you bought the Pole Saw.

POLE SAW NAMES AND TERMS

Clamping Lever Lever is loosened to allow inner pole to be adjusted and tightened to hold pole in position. Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain.

Inner Pole The moveable section of tubing to which the saw is attached.

Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and back towards operator.

Continued

111219 13 www.desatech.com